CMD - Dactyl Manuform Build

A build-log/tutorial on how to build the dactyl-manuform - A DIY ergonomic keyboard.

::LINKS::

Matt Adareth's Presentation: https://www.youtube.com/watch?v=uk3A41U0iO4
CMD-Dactyl-Manuform Repo: https://github.com/markdhooper/CMD-dactyl-manuform
Leinigen: https://leiningen.org/
OpenSCAD: https://www.openscad.org/
Clojure: https://clojure.org/
TheCrafsMan SteadyCraftin (hydro dipping tutorial): https://www.youtube.com/watch?v=maFcp9IbueA
Pro-Micro Pinout Reference: https://deskthority.net/wiki/Arduino_Pro_Micro
QMK Configurator: https://config.qmk.fm/#/handwired/dactyl_manuform/5x7/LAYOUT_5x7
QMK Firmware Repo: https://github.com/qmk/qmk_firmware/tree/master/keyboards/handwired/dactyl_manuform
QMK Toolbox: https://github.com/qmk/qmk_toolbox/releases

::MUSIC::
All music was composed by ConstaMentalDrift (Mark Hooper): https://www.youtube.com/watch?v=gj4BZzcAKkI

::TIME STAMPS:: (Thanks to Josh Myer)
0:19 Intro
1:10 Background
3:04 Tools & Supplies
5:29 3D Model Generation
11:12 Paint
13:40 Wiring
17:51 Programming
20:16 Test Drive

Видео CMD - Dactyl Manuform Build канала ConstaMentalDrift