💧 ANSYS Fluent Tutorial | Hot & Cold Fluid Mixing + Natural Convection CFD in 25 Minutes! 🔥

🌐 Explore More:
🔗 https://arminhashemi.org/
🛠️ Need Help with a Project?
📩 https://arminhashemi.org/order-project/
📸 Follow Me on Instagram:
https://www.instagram.com/caewitharminhashemi/
💼 Connect on LinkedIn:
https://www.linkedin.com/company/cae-with-armin

*💧 ANSYS Fluent Tutorial in 25 Minutes | Hot & Cold Fluid Mixing + Natural Convection CFD 🔥*

In this step-by-step ANSYS Fluent tutorial, I’ll show you how to model hot and cold fluid mixing in a Y-pipe using Computational Fluid Dynamics (CFD). You’ll learn how to set up velocity and temperature boundary conditions for both water and air, apply natural convection heat transfer, and generate professional contour plots for velocity and temperature.

🔍 *What You’ll Learn:*

✅Create a 3D Y-pipe geometry in SpaceClaim
✅Apply velocity inlet and pressure outlet boundary conditions
✅Set up hot and cold fluid mixing (water at 70°C, air at 20°C)
✅Apply natural convection with a heat transfer coefficient and ambient conditions
✅Generate and customize velocity & temperature contours in Fluent
✅Adjust color bar, font, and format for clear CFD visualization
✅Validate your results with mass balance checks
This case study is highly relevant for industrial mixing processes, thermal management systems, and CFD learners looking to strengthen their Fluent skills.

📌 Subscribe for more COMSOL & ANSYS tutorials.
👍 If you found this helpful, don’t forget to like and share!
0:00 0:21 Introduction
0:22 1:51 Model Description
1:52 6:03 Geometry
6:04 10:12 Mesh
10:13 11:29 Model
11:30 13:20 Material
13:21 16:10 Boundary Conditions
16:11 17:48 Solution Method
17:49 21:33 Contours
21:34 22:26 Mass Balance
22:27 24:05 Natural Convection and air
24:06 Results

#caewitharmin #ansys #ansysfluent

Видео 💧 ANSYS Fluent Tutorial | Hot & Cold Fluid Mixing + Natural Convection CFD in 25 Minutes! 🔥 канала CAE with Armin Hashemi