Acura OEM Key Fob Battery Replacement - Easy DIY

2025 Battery you need - https://amzn.to/41UT8Iq

Here is a quick and simple demonstration video on how to replace your dead / weak battery in your old school Acura key fob. The process is very straightforward and only a Philips screwdriver is required. Remove the two back screws and you will have gained access to your dead battery. Replace your weak 2025 battery and screw it back together. That is all that is required!

Program the transmitter:

NOTES: The system uses a stacking type memory that accepts up to 4 remotes. If you program a 5th remote, the system's memory for the 1st remote is erased.

To clear a lost or stolen transmitter from the system's memory, erase all transmitter codes and then reprogram them. Refer to the security system owner's manual.

If the valet/disarm button is released before programming is complete, the system will exit the programming mode.

1. Turn the ignition switch to ON (II).
2. Press and hold the Valet- Disarm button on the dashboard lower cover. (Continue to hold the button during this procedure, or programming will be cancelled) . The LED on the upper steering column cover flashes when the system is in programming mode.
3. Press the top button on the transmitter. Check that the parking lights flash to confirm that the transmitters code was accepted.
4. Press the top button on each of the remaining remotes. Check that the parking lights flash after each transmitter code is accepted.
5. Release the valet-disarm button to exit the programming mode.

Acura Integra Factory Oem Key Fob Keyless Entry Car Remote Alarm A269zua074
Acura OEM Remote FCC ID:A269ZUA074 P/N 08E51-ST7-2M0-01

Видео Acura OEM Key Fob Battery Replacement - Easy DIY канала Key Fob Rob