DIY Carbon Fiber Fairings - Resin Infusion Tutorial

How I made the mold:
https://www.youtube.com/watch?v=ba9wRf5QR7Y

Tools, equipment and materials used:

Release agent: https://www.easycomposites.eu/easylease-chemical-release-agent
210g carbon: https://www.easycomposites.eu/200g-22-twill-3k-carbon-fibre-cloth
650g carbon: https://www.easycomposites.eu/650g-22-twill-12k-carbon-fibre-cloth
Peel Ply: https://www.easycomposites.eu/pp180-peel-ply
Infusion Mesh: https://www.easycomposites.eu/fm100-resin-infusion-mesh
Silicon Connectors: https://www.easycomposites.eu/resin-infusion-silicone-connector
Infusion spiral: https://www.easycomposites.eu/resin-infusion-spiral-medium
Vacuum bagging film: https://www.easycomposites.eu/vb160-vacuum-bagging-film
Sealing tape: https://www.easycomposites.eu/vacuum-bagging-sealant-tape
Vacuum pump: https://www.ebay.it/itm/384331364807
Epoxy resin: https://www.easycomposites.eu/el2-epoxy-laminating-resin
Rotary tool: https://www.dremel.com/us/en/p/3000-f013300000
Polishing compound: https://www.easycomposites.eu/nw1-super-cutting-compound-black

0:00 Preview
0:21 Mold preparation
0:46 Cutting the carbon fiber cloth
1:21 Layup
2:29 Peel ply
2:56 Infusion mesh
3:46 Infusion spiral and connectors
4:30 Vacuum bagging
7:18 Leak test
7:48 Measuring epoxy resin
8:52 Infusion
10:43 Demold
13:45 Trimming the part
14:58 Wet sanding
15:54 Polishing
16:47 Finished product
17:04 Installation and conclusions

Видео DIY Carbon Fiber Fairings - Resin Infusion Tutorial канала Andrea Botti