3D Printed 6-Bay NAS case - Improved in every way!

This project is a follow up for my previous video where I shared a 4-bay NAS / APU case. After tons of feedback I decided to give it another go and create this new and improved version!

Check out the files and become a member of my Printables Club here:
https://www.printables.com/model/837218-nas-case-6-bay-3-ssd

Detailed printing instructions/recommendations with explanations and pictures can be found on Printables, by checking out the link above.

** Materials/components required to build this case:
31x M3 threaded inserts: https://amzn.to/4aOWJvy
31x M3x10mm machine screws: https://amzn.to/4b8ArER
8x 8x3mm Neodymium magnets: https://amzn.to/44fHn0Y
1x PC Screw kit (for standoffs + HDD mounts): https://amzn.to/4d4DJLn
1x Extra M3 screw for the PCIe card (optional)

**PC Components that this case can fit:
Mini ITX Motherboard: https://amzn.to/3QgLsMr
Or a NAS Motherboard (ITX form factor): https://amzn.to/3JtdIrv
SFX or SFX-L Power supply: https://amzn.to/3QcIVD1
Single slot PCIe expansion card: https://amzn.to/3UuBGZB
2x Slim 92mm PC fans (up to 22mm thick): https://amzn.to/49SK7SZ
3.5" HDDs (Up to 6x): https://amzn.to/3xPXR3y
2.5" SSDs (Up to 3x): https://amzn.to/3w73OIU
SATA power and SATA cables with 90 degree connectors (due to limited clearance): https://amzn.to/4ddI8vA

All of the links above are just to guide you in the right direction, you are responsible for doing your own research into what parts you should use to fulfill your own needs, all links are also "affiliate links", meaning I may earn a small commission for every qualified purchase at no extra cost to you.

Видео 3D Printed 6-Bay NAS case - Improved in every way! канала makerunit