Victron factory training day overview (with chapters)

We visited AM Solar in Springfield OR when the Victron factory training tour stopped by and received a day of training on Victron products including the Cerbo GX, multiplus and multiplus II inverters, solar charge controllers, Victron lithium batteries, Lynx bus bar, external BMS, alternator charging, and other topics.

This is a recording of selected sections of the training we received - it is not intended to be complete, or a replacement for the official training. Use at your own risk!

Here is a link to the "wiring unlimited" guide which was provided as companion materials:
https://www.victronenergy.com/upload/documents/Wiring-Unlimited-EN.pdf

Here is a link to the Victron ambassador's company that was doing a lot of the speaking during the small RV training. His name is Caza and he is interested in helping out and talking to prospective clients. https://rvsolarconnections.com/

Chapters
0:00:00 Start
0:00:30 Battery, fuse wiring and smart shunt
0:03:03 Lynx distributor bus bar and fusing
0:07:13 Orion smart DC to DC charger
0:09:23 Multiplus inverter
0:10:48 MPPT smart solar charge controller sizing
0:15:31 Solar panel series vs. parallel discussion
0:17:24 Battery protection and external vs internal BMS batteries
0:24:41 Discussion of flexible solar panels vs rigid panels
0:26:42 Multiple array wiring, disconnects, and charge controllers
0:29:06 Inverter/charger discussion, split phase
0:32:04 24 to 12 volt orion DC-DC converter for house loads
0:33:47 Victron smart lithium 24v battery bank with external BMS and battery protection
0:35:01 NMEA 2000 to VE Can and Cerbo wiring
0:37:10 Cerbo GX overview and training
1:24:31 Inverter battery wiring and ripple voltage
1:27:54 Inverter configuration and operation

Видео Victron factory training day overview (with chapters) канала This Old Bus