I've Decided to Build a Drone

The first of six videos that shows how I do building my first drone.

I have no soldering experience, no experience with electronics.

The drone I'm building is a 5" Alien built by Rotor Riot.
http://www.rotorriot.com/

All components used in this build are here:
-Frame and Hardware: http://store.rotorriot.com/impulse-rc-alien-rr5-kit/
-FPV Camera: http://www.geekbuying.com/item/Foxeer-HS1189-XAT1200M-2-8mm-1200TVL-1-2-7-CMOS-16-9-3MP-FPV-Camera-NTSC-368381.html
-FPV Antenna Set: http://store.rotorriot.com/tbs-triumph-antenna-set/
-Video Transmitter (VTX): http://store.rotorriot.com/25mw-raceband-5-8ghz-video-transmitter/
-4 x Engine Speed Controllers (ESCs): http://store.rotorriot.com/flyduino-kiss-24a-esc/
-4 x Motors: http://store.rotorriot.com/lumenier-2206-2350kv-motor/
-Flight Controller: http://store.rotorriot.com/flyduino-kiss-flight-controller/
-Radio Transmitter: http://store.rotorriot.com/frsky-x4r-sb-rx-w-sbus/
-Radio (Remote Control): http://store.rotorriot.com/taranis-x9d-plus-tx-with-soft-case-mode-2/
-Propellers: http://store.rotorriot.com/hq-prop-5x4x3-props-pair-red/
-Batteries: http://store.rotorriot.com/lumenier-1300mah-4s-60c-lipo-battery-xt60/
-FPV Goggles: http://www.getfpv.com/review/product/list/id/2240/
-Video Receiver for FPV Goggles: http://www.getfpv.com/fpv/video-receivers/fat-shark-5-8ghz-5g8rx-32ch-race-band-receiver-module-for-dominators.html
-Battery Checker: https://www.amazon.com/CellMeter-7-Digital-Battery-Capacity-Checker/dp/B00YWNDNS2/ref=sr_1_4?ie=UTF8&qid=1469475272&sr=8-4&keywords=lipo+battery+checker
-Charger: http://www.hobbyking.com/hobbyking/store/__78379__Turnigy_Reaktor_250W_10A_1_6S_Balance_Charger_AR_Warehouse_.html
-Power Supply for Charger:
http://www.hobbyking.com/hobbyking/store/__76184__Turnigy_Reaktor_Pro_350W_23A_Power_Supply_100_240V_AC_.html
-Soldering Work Station: https://www.amazon.com/Soldering-Rework-Station-Stand-Nozzle/dp/B01AMC0L2M/ref=sr_1_5?ie=UTF8&qid=1469475480&sr=8-5&keywords=soldering+station
-Solder: https://www.amazon.com/KESTER-SOLDER-24-6040-0027-Stand-Diameter/dp/B00068IJPO/ref=sr_1_57?ie=UTF8&qid=1469477304&sr=8-57&keywords=soldering+station
-Cutting Mat: https://www.amazon.com/DAFA-Professional-Self-Healing-Double-Sided-Introductory/dp/B00P6KPKB8/ref=sr_1_5?ie=UTF8&qid=1469475639&sr=8-5&keywords=self+healing+cutting+mat
-Helping Hands: https://www.amazon.com/SE-MZ101B-Helping-Magnifying-Glass/dp/B000RB38X8/ref=sr_1_3?ie=UTF8&qid=1479144339&sr=8-3&keywords=soldering+helping+hands

Rotor Riot's tutorial video is here:
https://www.youtube.com/watch?v=QrOJySAljwE

Music Credit: Beirut - No No No

Видео I've Decided to Build a Drone канала Matt Polski