Convert Fluorescent to Led

Convert Fluorescent to Led https://www.ionhowto.com/linear-fluorescent-tube-lights-upgrade-to-led/
Convert fluorescent to Led and upgrade T8 fluorescent tube fixture to LED tube.
Non ballast bypass modification, no ballast needed.
T8 fluorescent tube fixture to LED tube upgrade wiring.

Linear Fluorescent Tube Lights Upgrade to LED retrofit.

Amazon:
Fluorescent to LED conversion kit https://rex.red/fluorescent-to-led-conversion-kit *
LED tube lights https://rex.red/led-tube-lights *
LED tube fixture https://rex.red/led-tube-fixture *
LED bathroom lights https://rex.red/led-bathroom-light-fixture *
Multimeter https://rex.red/digital-multimeter *
Electrician tools set https://rex.red/electrician-tools-set *
Electrical Tape https://rex.red/electrical-tape *
Electrician screwdriver https://rex.red/electrician-screwdriver-set-insulated *
Tester tool https://rex.red/electrician-tester-tool *

T8 60cm or longer Fluorescent tube fixture upgraded go LED tube fixture.
Removed Starter from Fluorescent fixture.
Removed ballast from Fluorescent fixture.
Most important is to mark the fixture as LED ONLY.

Do not install a Fluorescent tube in a LED fixture or a modified fixture for LED tube lights. Fluorescent tube light without ballast may not start wich is the safest way to fail but
might also start without ballast and get damaged instantly with damage to the things around from pieces of glass.
Only for LED after the modification is done.

There are 2 types of LED tubes.

First is single sided where L and N are separate pins and there is a dummy starter that will bring the N to the L side on one of the pins.
This can work only if the existing fixture connectors are NOT shunted.
Shunted means the 2 pins on one side are shorted together. You can use a multimeter to test the tombstone connectors that receive the ends of the tube light (with no tube installed).
If there is continuity between the pins on one side they are Shunted tombstone connectors and they will NOT work with Single sided LED tubes.

There are various types of fixtures and some will not work for this.

Second type is with terminals at both ends L on one side and N on the other side.
This type is much easier to build and safer to install I believe also.
Third bonus option is to get a completely new LED light fixture and install that which has the LED lights and fixture built-in as one unit.

The thirds is the easiest but you can try option 2 if you like and feel confident you can safely do it.

DO NOT TRY THIS AT HOME.
High voltage electricity is DANGEROUS.
Call an ELECTRICIAN to install light fixture for you.
If you try this, you do it at your own risk.

Subscribe and Ring the Bell to watch more videos.
ION HowTo https://rex.red/ion-howto
RedNumberONE https://rex.red/rno

Buy merch https://rex.red/ionhowto-store
Check it, buy it, post it and
tag it #ionhowto or #rednumberone

Join this channel to get access to perks:
https://www.youtube.com/channel/UCx4Qbp3iC97kQzj7e7g7slg/join

Contact email for business inquiries ONLY diyrno ( at ) gmail.com

Any questions?
Feel free to ask in the comments section bellow.
Subscribe, Like and SHARE this video.

We earn money from qualifying purchases using our affiliate links.
Affiliate links are marked with a star. *
When you use our * links, you support this channel.
As an Amazon Associate I earn from qualifying purchases.

Join us
TikTok channel: https://rex.red/ion-tiktok
Telegram channel: https://rex.red/ion-telegram
Twitter: https://twitter.com/dragosion
Website https://diy.rednumberone.com
Food Recipes: https://www.rednumberone.com/

Видео Convert Fluorescent to Led канала IONHowTo