Inside a cheapo NiMh charger with schematic.
I bought this to see just how much of a charger you get for a mere £5. It turns out that it's actually quite nice inside and has good slow-charger (200mA) functionality.
It has a cut-off timer that may be as short as just 10 hours so it's probably best suited to cells under 2000mAh or for topping up larger cells. That timer section can be bypassed internally though.
If you enjoy my videos you can support the channel with a dollar for coffee, cookies and gadgets at https://www.patreon.com/bigclive
Видео Inside a cheapo NiMh charger with schematic. канала bigclivedotcom
It has a cut-off timer that may be as short as just 10 hours so it's probably best suited to cells under 2000mAh or for topping up larger cells. That timer section can be bypassed internally though.
If you enjoy my videos you can support the channel with a dollar for coffee, cookies and gadgets at https://www.patreon.com/bigclive
Видео Inside a cheapo NiMh charger with schematic. канала bigclivedotcom
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
inside a cheap and very shitty USB battery charger.inside a "Cree" head flashlight with schematic.EEVblog #811 - How The Varta 15 Minute Battery Charger WorksAre AA NiMH Batteries obsolete? Here is everything you need to know about them!How to convert Ryobi P117 charger from 120V to 230V use.What's inside Eneloop and LIDL NiMh cells (fire, apparently)Test of a PSU like the one that went on fire.Quest for the shittiest battery charger continues. (schematic)Teardown of an IKEA Koppla USB power supply.New i2 Battery Charger by NitecoreInside a Vapex 8-way fast charger. (NiMh)Inside a Znter lithium 9V battery.Flowing light USB cable teardown and schematic.How to Make 1.2V Battery Charger | Automatic Battery ChargerWhat's inside IKEA Stenkol chargerSoldering basics and choosing a cheap soldering iron.936D digital soldering station test and internal look.Troubleshooting a heating controller.Inside a "4kW" ebay power controller with schematic.