CFL Bulb to Induction Furnace - The Ultimate DIY Project

Watch as we turn a simple CFL bulb into a powerful induction furnace in this mind-blowing experiment! Witness the magic of engineering in action!
Watch as we engineer magic by transforming an old CFL bulb into a powerful induction furnace! This DIY project will blow your mind with its innovative and creative approach to repurposing materials. Get ready to be amazed by the power of engineering creativity!
Did you know that you can turn an old CFL bulb into a functional induction furnace?! 😲 In this video, you will learn a simple and interesting engineering trick that will make a powerful induction furnace from discarded items at minimal cost. This method is very useful for melting small metals, conducting science experiments, and electronic projects. Be sure to watch until the end of the video and write your opinion in the comments! ✅🔥

🔔 Be sure to subscribe so you don't miss the next interesting videos!

Steps to make an induction furnace from a CFL bulb:

🔹 Materials needed:

A burnt or old CFL bulb
A lacquered copper wire (of the appropriate diameter)
A MOSFET transistor (such as IRFZ44 or similar)
A resistor and diode suitable for the circuit
A breadboard or PCB
A 12 to 24 volt DC power supply
🔹 Construction steps:
1️⃣ First, open the CFL bulb and check the electronic board inside it. Most of these lamps include a high-frequency inverter circuit that can be used to run an induction circuit.
2️⃣ Remove some of the extra parts and adjust the circuit with a few changes to produce high-frequency alternating current.
3️⃣ Make an induction coil using copper wire (about 5 to 10 turns, depending on the application).
4️⃣ Connect the coil to the circuit and connect it to a 12 to 24 volt power source.
5️⃣ Test it! If everything goes well, you will have a small and functional induction furnace that is capable of heating and even melting small metals such as iron, copper or aluminum!

🔥 Important note: This project requires caution, as it works with high voltages. Please be safe and wear gloves and protective glasses.

📌 If you liked this video, be sure to like, comment and share the video with your friends! 🚀

Видео CFL Bulb to Induction Furnace - The Ultimate DIY Project канала Electro Empire