1-844-334-2929 - How to Load Paper in Canon PIXMA E470 (Step-by-Step for Beginners)

If you’ve just purchased a Canon PIXMA E470 or you’re struggling to figure out how to properly load paper, you’re in the right place. Many beginners make small mistakes when inserting paper, which can lead to annoying issues like paper jams, misaligned prints, or the printer not picking up paper at all.
🖨️ Why Proper Paper Loading Matters

Before we jump into the steps, it’s important to understand why loading paper correctly is so important.

Incorrect paper loading can cause:

Paper jams inside the printer
Multiple sheets feeding at once
Crooked or misaligned prints
Printer failing to detect paper

When you load paper the right way, your printer performs better, prints faster, and lasts longer without maintenance issues.

🔌 Step 1: Turn On the Printer

Start by turning on your Canon PIXMA E470 printer.

Press the power button and wait for the printer to fully initialize. You’ll notice the lights stop blinking and the printer becomes quiet. This indicates that the printer is ready to use.

Never try to load paper while the printer is off or in the middle of an operation, as this can cause errors or misfeeds.

📂 Step 2: Open the Rear Paper Support

The Canon PIXMA E470 uses a rear paper tray for loading paper.

Locate the paper support at the back of the printer and gently pull it upwards. Extend it fully so that it can properly hold the paper stack.

This tray is designed to keep your paper aligned and stable during printing, so make sure it is fully open.

📤 Step 3: Pull Out the Output Tray

Now move to the front of the printer.

Carefully pull out the output tray where printed pages will come out. If your printer has an extension flap, open that as well.

This step is important because without the output tray, printed pages can fall out or get misaligned.

📄 Step 4: Prepare the Paper Properly

Take a stack of plain A4 paper. Before inserting it into the printer, you need to prepare it correctly.

Hold the stack and tap it gently on a flat surface to align all edges. This ensures that the sheets are even and don’t stick together.

Also, check the paper condition:

Make sure it is not torn
Avoid curled or bent sheets
Do not use damp or dirty paper

Using poor-quality paper can lead to feeding issues and poor print results.

📏 Step 5: Adjust the Paper Guides

Inside the rear tray, you’ll find a movable paper width guide.

Slide this guide to the side to create enough space for your paper stack. This step is necessary because inserting paper without adjusting the guide can damage the edges or cause misalignment.

Always adjust the guide before inserting paper.

📥 Step 6: Insert the Paper Correctly

Now comes the most important step.

Place the paper into the rear tray:

The printable side should face up
Insert the paper gently until it stops

Do not push the paper too hard. Let it rest naturally in the tray.

Also, avoid overloading the tray. The Canon PIXMA E470 typically supports around 60 sheets of plain paper. Loading more than this can cause paper jams or multiple sheets feeding at once.

📐 Step 7: Align the Paper Guides

Once the paper is inserted, slide the paper guide back toward the stack.

Make sure the guide touches the edges of the paper snugly, but do not press too tightly. If it’s too tight, the paper may not move freely, causing feeding issues.

Proper alignment ensures that each sheet is picked up smoothly and printed evenly.

🖥️ Step 8: Send a Test Print

Now that your paper is loaded correctly, it’s time to test the setup.

Send a print command from your computer, laptop, or mobile device. You can print a simple document or a test page.

Watch how the printer pulls the paper and prints. If everything is done correctly, the paper should feed smoothly without any noise or errors.

⚠️ Common Mistakes to Avoid

Even small mistakes can cause big problems when it comes to printers. Here are some common errors you should avoid:

❌ Overloading the Tray

Adding too much paper can cause jams or multiple sheets feeding at once.

❌ Incorrect Paper Orientation

Always make sure the printable side is facing up.

❌ Not Adjusting the Guides

Loose guides can cause crooked prints, while tight guides can block paper movement.

❌ Using Damaged Paper

Wrinkled or folded paper can easily get stuck inside the printer.

🔧 Troubleshooting Paper Loading Issues

If your Canon PIXMA E470 is not picking up paper, don’t worry. Here are some simple fixes:

🔄 Reload the Paper

Remove all sheets and insert them again properly.

🌬️ Fan the Paper Stack

Slightly fan the pages to prevent them from sticking together.

🧼 Clean the Rollers

Dust or dirt on the rollers can prevent proper paper feeding. Cleaning them can fix the issue.
If this guide helped you:

👍 Like the video
💬 Comment your printer problem below
🔔 Subscribe for more printer tutorials and fixes

Видео 1-844-334-2929 - How to Load Paper in Canon PIXMA E470 (Step-by-Step for Beginners) канала 123hpcomsetup ijstartcanon