SKYVAN Cargo Dropper
A 1:12 semi-scale Shorts SC.7 Skyvan made of Readi-Board ("Dollar Tree") foamboard, hot glue, packing tape, and a little bit of carbon fiber and titanium. It weighs 2600g (5.75 lbs) all-up without cargo. I have carried three full 500ml water bottles plus parachute and rigging totaling 2000g (4.4 lbs). It flies on four 2200mAh 3s packs and has two 1000kV 110g motors drawing about 720 watts total.
SPECIFICATIONS:
Wingspan: 66" (two 30" wing sections + 6" gap in center section
Total chord: 9 1/2"
Airfoil chord: 7"
Ailerons & Flaps: 2 1/2" x 13" each
Leading edge: 12" aft of nose
CG: 3" aft of LE
Length: 44"
Fuselage: 8" x 8"
Horizontal stabilizer: 8" chord (total), 23" span
Elevator: 2" full span
Vertical stabilizers: 8" chord, 12" height
Landing gear: 3 1/2" diameter
Nose gear axle: 5" aft of nose
Main gear axle: 18" aft of nose
Having great fun with the parachutes, which are scratch-made of nylon fabric, tulle netting, cord, hot glue, and zip ties. Look for video coming soon. This one uses a pilot parachute which releases the main parachute and payload as it is deployed, then pulls the main parachute out, then finally both parachutes extract the cargo.
SPECIFICATIONS:
Wingspan: 66" (two 30" wing sections + 6" gap in center section
Total chord: 9 1/2"
Airfoil chord: 7"
Ailerons & Flaps: 2 1/2" x 13" each
Leading edge: 12" aft of nose
CG: 3" aft of LE
Length: 44"
Fuselage: 8" x 8"
Horizontal stabilizer: 8" chord (total), 23" span
Elevator: 2" full span
Vertical stabilizers: 8" chord, 12" height
Landing gear: 3 1/2" diameter
Nose gear axle: 5" aft of nose
Main gear axle: 18" aft of nose
Видео SKYVAN Cargo Dropper канала Experimental Airlines
SPECIFICATIONS:
Wingspan: 66" (two 30" wing sections + 6" gap in center section
Total chord: 9 1/2"
Airfoil chord: 7"
Ailerons & Flaps: 2 1/2" x 13" each
Leading edge: 12" aft of nose
CG: 3" aft of LE
Length: 44"
Fuselage: 8" x 8"
Horizontal stabilizer: 8" chord (total), 23" span
Elevator: 2" full span
Vertical stabilizers: 8" chord, 12" height
Landing gear: 3 1/2" diameter
Nose gear axle: 5" aft of nose
Main gear axle: 18" aft of nose
Having great fun with the parachutes, which are scratch-made of nylon fabric, tulle netting, cord, hot glue, and zip ties. Look for video coming soon. This one uses a pilot parachute which releases the main parachute and payload as it is deployed, then pulls the main parachute out, then finally both parachutes extract the cargo.
SPECIFICATIONS:
Wingspan: 66" (two 30" wing sections + 6" gap in center section
Total chord: 9 1/2"
Airfoil chord: 7"
Ailerons & Flaps: 2 1/2" x 13" each
Leading edge: 12" aft of nose
CG: 3" aft of LE
Length: 44"
Fuselage: 8" x 8"
Horizontal stabilizer: 8" chord (total), 23" span
Elevator: 2" full span
Vertical stabilizers: 8" chord, 12" height
Landing gear: 3 1/2" diameter
Nose gear axle: 5" aft of nose
Main gear axle: 18" aft of nose
Видео SKYVAN Cargo Dropper канала Experimental Airlines
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![SYNAPSE BUILD: Vertical Stabilizers](https://i.ytimg.com/vi/HyT1-pmdpJs/default.jpg)
![SEAPLANE SCRATCHBUILDING CONTEST $200 in prizes](https://i.ytimg.com/vi/KZOwcItkcKQ/default.jpg)
![SCRATCHBUILDING CONTEST - "PRIDE PLANE"](https://i.ytimg.com/vi/8cizM7TENqQ/default.jpg)
![Experimental Airlines Style V-Tail FPV Motorglider](https://i.ytimg.com/vi/RngY-lVHVqE/default.jpg)
![RC AEROTOWING - Coyote Basin Park, Arizona, August 2012](https://i.ytimg.com/vi/UXRBgz2p_G0/default.jpg)
![COBRA HD FPV CAMERA by Boscam, from HobbyKing](https://i.ytimg.com/vi/bPZhhgjT6w4/default.jpg)
![E.A. UPDATE - Fleet, Future Events, News, & Miscellanea](https://i.ytimg.com/vi/jgAne9RP1B4/default.jpg)
![PRIDE PLANE Contest Entries](https://i.ytimg.com/vi/cHPl5QP3zXo/default.jpg)
![3DR Y6 MULTICOPTER, PAPAGO PARK BUTTES FPV](https://i.ytimg.com/vi/B3RaYzDXP28/default.jpg)
![NEW GENERATION HOBBIES POWER SUPPLY UNIT - PSU for Lawmate Video Transmitters](https://i.ytimg.com/vi/vhdcx3pG2Hs/default.jpg)
![Synapse FPV Desert Aerial Video](https://i.ytimg.com/vi/Y3ENjL4a3kQ/default.jpg)
![SYNAPSE BUILD: Motor Choice and Mounting](https://i.ytimg.com/vi/J4SH-vPQgXI/default.jpg)
![EA 2016 Flight Plan](https://i.ytimg.com/vi/xpgbC-2FPWI/default.jpg)
![incidental enlightenment](https://i.ytimg.com/vi/XgQTs3Ohhhw/default.jpg)
![SYNAPSE Flight Video](https://i.ytimg.com/vi/X7UV--KIrxA/default.jpg)
![EA 2016 update](https://i.ytimg.com/vi/qkSvD5MAFtA/default.jpg)
![3 E.A. FAVORITES - a Fleet Revisit, Menage A Trois](https://i.ytimg.com/vi/lozk3AQ_HRM/default.jpg)
![From the Arctic Circle](https://i.ytimg.com/vi/38ZqYCzUEfE/default.jpg)
![the Armin Wing: part 4 - Making the Control Surfaces](https://i.ytimg.com/vi/idnT5eP5Snw/default.jpg)
![APD Canard Wing Construction](https://i.ytimg.com/vi/lWzd12P1beA/default.jpg)
![How to build a V-Tail for RC Planes - Experimental Airlines Style](https://i.ytimg.com/vi/c1o5K86-9OI/default.jpg)