Some plumbing electrical and digging
Комментарии отсутствуют
Информация о видео
Другие видео канала
Run to John Deere for parts. Let’s check the inventory out.
THE BILLSTMAXX CHANNEL WAS HIJACKED.....THIS IS WHAT HAPPENED
Lets see if the Kubota tiller will start up and do some tilling also some 0 turn mower
FORD 800...Let's diagnose the tapping sound in the engine drop the oil and inspect the air filter
Farm Sim Saturday....Bigger harvest...Bought another field....Iowa plains map
New better parts for the oil pressure line for the ford 800..Lets get her this time
Gravel levelling and build a form for the sawmill base Concrete
Trip to see a large personal antique equipment display...Kennetcook NS
Deere 47 Snowblower reassemble and test out
Service work to the STIHL FS90R and FS111R string trimmers
Sunday Garden update. August 29th 2021. White pumpkins are getting massive.
Ford 800..Lets tear off the front end axle and get into the front main seal...What a mess
15 HP Powerfist engine tear down for an experiment
Had an interesting few days....Admitted to the hospital...Here's my story
Ford 800 Fuel tank Install...Interesting quirk...Then a full warm up and drive
Let's start the re-assembly of the Ford 2N input shaft.. New seal installation
Some success today pulling cylinder sleeves...Ford 800
Ford F-250 diesel cold start with block heater plugged in test...February 5, 2022
This is how I make a new oil pressure line for the 1944 2N
Ford 800....Installing the new head and torquing to spec
Monster 32 foot log to process lets clean it up