PULLING A CIVIC ENGINE FOR THE FIRST TIME!!! - EP 3. Budget Civic Build

In this episode of the budget civic build, I remove an engine for the first time from my 1994 HONDA CIVIC HATCH! I also reveal what engine I will be swapping into the car! This is a step by step video on how to remove your civic engine!

ENGINE REMOVAL CHECKLIST:
- Drain fluids from engine / trans / radiator
- Remove axles, start with axle nut 32mm, remove cotter pin, remove 17mm castle nut, pull hub up and away to remove axle, remove axle from trans
- Remove intake
- Remove radiator
- Disconnect battery
- Remove harness lines from fuse box
- Unplug passenger side shock tower harness
- Unplug wiring harness connections on transmission
- Unplug driver side harness
- Disconnect grounds
- Disconnect MAP sensor
- Remove heater core coolant hose
- Remove fuel filter locking nut and line
- Remove top hose on intake manifold
- Remove emission solenoid to remove hose
- Remove brake booster hose
- Remove fuel pressure regulator
- Remove throttle cable
- Double check for any other connections
- Remove shift linkage, remove knob, console
- Remove exhaust downpipe
- Remove clutch line from transmission
- Support engine from underneath
- Remove transmission front mount
- Remove rear mount bolts then mount
- Remove transmission side top mount / passenger side
- Remove engine front lower mount
- Remove driver side mount
- Lower Engine Down into mover dolly
- Jack Chassis up to make space to pull engine out through passenger wheel well
Youtube Vids to help:
https://www.youtube.com/watch?v=9ejKt_rv26E&ab_channel=RefineMovement

Socials:
IG - @jasonwitdacreations

TAGS:
#diy
#diycivic
#civichatchback
#civicbuild
#civics
#jdm
#hondacivic
#engineswaps
#engineswap
#civicmodified

Видео PULLING A CIVIC ENGINE FOR THE FIRST TIME!!! - EP 3. Budget Civic Build канала jasonwitdacreations