Mustang Car Rotisserie Assembly 1965-1993

Bill shows you this Mustang Car Rotisserie Assembly for your 1965-1993 Mustang.

This adjustable rotisserie is going to allow you to perform a more thorough restoration on your Mustang by allowing you to lift it off the ground and rotate it 360 degrees so you have access to the underside of your 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, or 1993 Mustang.

Assembly of the rotisserie will require several tools, so make sure to have what is listed before starting. You'll begin by adding a few bolts and installing the leg extension to the upright. You'll then install the casters, which allow the rotisserie to move easily, but stay in place when the brakes are locked. Bill then shows how to install the jack and pivot tube, followed by the upper T bar. Lastly, you'll want to install the attachment arms with the threaded nuts facing upwards.

Once you finish with the one side, assembly of the other side is almost the same with only a couple exceptions. Bill then shows how to position the rotisserie underneath your car and the locations for attaching it to your Mustang. To rotate the car once it is attached, you'll want to losoen the bolts on the back of the rotisserie. Then you'll spring back the geared stop and lock it in place, which will allow you to turn the car.

Check out more 1965-1973 Mustang Sheet Metal Tools from CJ's here:
http://www.cjponyparts.com/1964-1973-mustang-sheet-metal-tools/c/10180060/

Subscribe to CJ Pony Parts on YouTube here:
http://www.youtube.com/subscription_center?add_user=cjponyparts

Видео Mustang Car Rotisserie Assembly 1965-1993 канала CJ Pony Parts