zj diy adjustable front track bar
My parts to build my adjustable track bar finally came in. The adjustable track bar and the new axle side relocation bracket will fix most of the issues the wj knuckle swap caused. i wouldnt recommend doing this without at least a 4 inch lift.i used 1.5" dom and a chevy 1 ton tie rod end as well as a 7/8" heim joint to make my own track bar.
Видео zj diy adjustable front track bar канала Thomas Beyer
Видео zj diy adjustable front track bar канала Thomas Beyer
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Build Your Own Track Bar (Jeep Cherokee XJ)JEEP REAR TRACK BAR REPLACEMENT/UPGRADE (ROUGH COUNTRY PART# 10512)wj knuckle swap pt3 and crossover steering buildjeep zj front bumper cutJeep XJ trackbar support braceIron Rock Offroad Rock-Link Long Arm install on a Jeep Cherokee XJJeep Control Arm Bushings - TIPS & TRICKS TO CURE DEATH WOBBLEInstalling Zone Longer Sway Bar Links on Lifted Jeep Grand Cherokee WJ | Najar OffroadJeep XJ, MJ, TJ, ZJ Adjustable Track Bar Install | Rough CountryJEEP DEATH WOBBLE FIX **Before and after trackbar replacement**Installing A 3 inch lift On A XJ PT. 1 | Budget Lift For A Jeep Cherokee XJeimkeith PCK Install | DIY Adjustable Panhard Bar | 1st Gen Sequoia | Step-by-StepDIY High Steer Kit from Ruff Stuff Specialties33's on 2" of lift, Dana 44a/44hd axle issues with my 5-speed swapped V-8 Jeep Grand Cherokee ZJJeep Grand Cherokee 4x4 Project ZJ Part 37 Custom 2x6 Steel Rock Sliders Rocker Panel ReplacementOTA Track Bar Install - Trail Logic IndustriesHow to lift a Jeep xj 6 inches for $600Jeep Cherokee XJ Speaker Upgrade and ReplacementJeep XJ, ZJ, y MJ Track Bar by JeePoros ModificacionesJEEP XJ - ZJ TIE ROD UPGRADE