Removing Bronze Bushings & Brazing a Broken Casting for Leo at Sampson Boat Co.
Leo at Sampson Boat Company asked if I could help him by doing a repair to a broken casting off of a pipe threading machine that he purchased. We started by removing bronze bushings that slide on some rails and then brazing the broken casting back together.
Visit Sampson Boat Company YouTube channel: https://www.youtube.com/channel/UCg-_lYeV8hBnDSay7nmphUA/
Support VintageMachinery.org on Patreon:
https://www.patreon.com/vintagemachinery
Make a one time donation to VintageMachinery via PayPal:
https://www.paypal.me/VintageMachinery
Please Visit: http://www.vintagemachinery.org
Sponsored by:
American Rotary Phase Converters
http://www.americanrotary.com
Use checkout code "Vintage10" for a 10% discount on all AD, ADX and AI converters!
Видео Removing Bronze Bushings & Brazing a Broken Casting for Leo at Sampson Boat Co. канала Keith Rucker - VintageMachinery.org
Visit Sampson Boat Company YouTube channel: https://www.youtube.com/channel/UCg-_lYeV8hBnDSay7nmphUA/
Support VintageMachinery.org on Patreon:
https://www.patreon.com/vintagemachinery
Make a one time donation to VintageMachinery via PayPal:
https://www.paypal.me/VintageMachinery
Please Visit: http://www.vintagemachinery.org
Sponsored by:
American Rotary Phase Converters
http://www.americanrotary.com
Use checkout code "Vintage10" for a 10% discount on all AD, ADX and AI converters!
Видео Removing Bronze Bushings & Brazing a Broken Casting for Leo at Sampson Boat Co. канала Keith Rucker - VintageMachinery.org
Показать
Комментарии отсутствуют
Информация о видео
6 марта 2020 г. 17:28:50
00:20:45
Другие видео канала
Turning Bronze Bushings and Pressing them in Place: Casting Repair for Leo at Sampson Boat CompanyThe Ultimate Shop Air Compressor Setup! (at least for me....)Restoration a very old 15 gear reducer | Reuse antique gearboxes | Restored rusted transmission boxCasting a coin for Tally Ho! | Part 1Steam Stoker Engine Restoration 13: Making Wooden Foundry Patterns for the Valve SleevesRestoring Sets of Norton IM313 Multi-OilstonesPouring Babbitt Bearings on the J. A. Vance Planer/MatcherCast Iron Repair Job: Machining a Replacement Casting and Brazing in PlaceOne For The LandlordMachining Tapered Threads for a Steam Locomotive Try-Cock RepairInstalling a Dro-Pro’s Digital Read Out on a Monarch Model K LatheSteam Stoker Engine Restoration Part 14: Molding & Pouring Cast Iron at Windy Hill FoundryRestoring a Wilton 800S 8-in Bullet Machinist ViseSteam Locomotive Throttle Valve Repair: Turning and LappingRepairing a Steam Whistle for the Steam Powered SawmillPouring Bronze / Fastening Floors - Wooden Boat Rebuild (EP81)Machining Tapered Flats on Crescent Machine Co. Jointer/Planer Key PlugsMetal Planer Restoration 40: Making a Bevel Gear on the Horizontal Milling MachineThe Windy Hill Foundry Square: Milling and Grinding a Casting Parallel and Square