Cricut Engraving Placement - Temporary Jig Method
How to use the temporary jig method for precise placement (alignment or centering) of your engraving with the Cricut Maker. IMPORTANT. As of v6.10, Cricut has removed the ability to leave the mat loaded as shown in the video. Continue reading for new instructions, related links, etc.
Please call Cricut at 877 727 4288 (USA) or contact them via https://help.cricut.com/hc/en-us/requests/new to let them know the ability to keep the mat loaded, as in versions 6.5-6.10, is important to you.
The current workaround to keep the mat loaded as of version 7.3.95:
Please note that in order to keep the mat loaded on a computer, you must be using a USB connection.
IMPORTANT: Be sure to save your file before clicking Make it
-Once a layer is completed and you see the large check mark in the center of the screen, unplug the USB cable connecting your computer to your Cricut from either end.
-Click on Cancel in the lower right and then Yes at the top. That will bring you back to the Make screen.
-Click on Cancel at lower right again to go back to the Design Space Canvas.
-Click on Make It and continue to set up the next mat.
-Plug the USB cable back in when prompted to choose a machine on the Make screen and cut the next mat.
-Repeat until all mats are finished.
If you are having trouble keeping the mat loaded, the sensor jig method (linked below) is always a good option
Free font, CC Leddler used in the video
https://bit.ly/3mHPJby (aff link)
Where to buy the blanks featured in video
Craft Chameleon https://bit.ly/3dTiJsn (aff link)
Cricut Maker Engraving Tip with QuickSwap Housing
https://amzn.to/2PNVw2T (afflink)
Cricut Maker Engraving Tip
https://amzn.to/37EqNJO (afflink)
The Dummy Shape Method for Aligning Engraving
(the no jig method we used before mat could stay loaded)
https://www.youtube.com/watch?v=VQ7-mIkXzkc
The Sensor Jig (re-usable) Method for precisely aligning engraving
https://www.youtube.com/watch?v=bmCUkCHb1jY
How to Fill Fonts and images for Engraving, Foiling and Drawing
https://www.youtube.com/watch?v=hIPnbJ1m7MQ
How to Engrave Photos
https://www.youtube.com/watch?v=0HDP791s-ys
Cricut Engraving with CleverSomeday Facebook Group
https://www.facebook.com/groups/191403481797346
Pre-filled fonts and other resources
https://cleversomeday.com/sketching
Engraving Resource Page
https://cleversomeday.com/cricutengrave
Thank you for liking, subscribing, commenting and using my affiliate links!
Blog: http://cleversomeday.com
Twitter: @cleversomeday
Instagram: cleversomeday_
Facebook: https://www.facebook.com/cleversomeday
To reach me: http://cleversomeday.com/contact
Видео Cricut Engraving Placement - Temporary Jig Method канала CleverSomeday
Please call Cricut at 877 727 4288 (USA) or contact them via https://help.cricut.com/hc/en-us/requests/new to let them know the ability to keep the mat loaded, as in versions 6.5-6.10, is important to you.
The current workaround to keep the mat loaded as of version 7.3.95:
Please note that in order to keep the mat loaded on a computer, you must be using a USB connection.
IMPORTANT: Be sure to save your file before clicking Make it
-Once a layer is completed and you see the large check mark in the center of the screen, unplug the USB cable connecting your computer to your Cricut from either end.
-Click on Cancel in the lower right and then Yes at the top. That will bring you back to the Make screen.
-Click on Cancel at lower right again to go back to the Design Space Canvas.
-Click on Make It and continue to set up the next mat.
-Plug the USB cable back in when prompted to choose a machine on the Make screen and cut the next mat.
-Repeat until all mats are finished.
If you are having trouble keeping the mat loaded, the sensor jig method (linked below) is always a good option
Free font, CC Leddler used in the video
https://bit.ly/3mHPJby (aff link)
Where to buy the blanks featured in video
Craft Chameleon https://bit.ly/3dTiJsn (aff link)
Cricut Maker Engraving Tip with QuickSwap Housing
https://amzn.to/2PNVw2T (afflink)
Cricut Maker Engraving Tip
https://amzn.to/37EqNJO (afflink)
The Dummy Shape Method for Aligning Engraving
(the no jig method we used before mat could stay loaded)
https://www.youtube.com/watch?v=VQ7-mIkXzkc
The Sensor Jig (re-usable) Method for precisely aligning engraving
https://www.youtube.com/watch?v=bmCUkCHb1jY
How to Fill Fonts and images for Engraving, Foiling and Drawing
https://www.youtube.com/watch?v=hIPnbJ1m7MQ
How to Engrave Photos
https://www.youtube.com/watch?v=0HDP791s-ys
Cricut Engraving with CleverSomeday Facebook Group
https://www.facebook.com/groups/191403481797346
Pre-filled fonts and other resources
https://cleversomeday.com/sketching
Engraving Resource Page
https://cleversomeday.com/cricutengrave
Thank you for liking, subscribing, commenting and using my affiliate links!
Blog: http://cleversomeday.com
Twitter: @cleversomeday
Instagram: cleversomeday_
Facebook: https://www.facebook.com/cleversomeday
To reach me: http://cleversomeday.com/contact
Видео Cricut Engraving Placement - Temporary Jig Method канала CleverSomeday
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How To Fill In Writing Text in Design Space and Make Solid Letters using Hatch FillLearn to make Insert Cards for the Cricut Maker or Explore!The 1 Hack To PROFESSIONALLY Engrave With Your Cricut | How to Engrave Acrylic With CricutEngrave & Cut Shrink Plastic with the Cricut Maker (Custom Pet tags and Keychains)Use Ink Embossing Pens in Your Cricut to Create Stunning Works of ArtFilled In Foiling, Engraving and Drawing with Cricut Design SpaceEngraving Metal with Cricut Explore Air 2 (or Cricut Maker)20 CRICUT HACKS I LEARNED ON TIKTOKTooling Leather with Your CricutHow to Engrave Acrylic Using the Cricut Maker and the Cricut Engraving TipCRICUT MAKER | HOW TO CONVERT PHOTO TO SVG & ENGRAVE ACRYLIC USING FILL LINES IN DESIGN SPACEAlignment for Cricut Engraving - Dummy Shape MethodCricut Maker Engraving Dog Tag - TutorialTHE CUTEST CARD EVER, AND SO SIMPLE! LET'S MAKE A CARD FROM LEFTOVER PAPER SCRAPS!CRICUT JOY CARDS WITH CRICUT MAKER : 2 WAYS TO MAKE THEM!Easy Acrylic Keychains Tutorial | Start to Finish with a Cricut!Emboss and Deboss with the Cricut Debossing Tool + Your Cricut MakerHow To Paint Engraved AcrylicFINALLY I got what I wanted - CriCut Maker 3