Sieg X2.7 Mill CNC Conversion - Part 2 - Y & Z Axis
Mini Mill CNC conversion - Y & Z axis.
I've built a handful of cnc routers and this would be my first mill cnc conversion.
Thanks for watching :)
More Images of this build
http://chris-builds.com/index.php/sieg-x2-7-mill-conversion
2D Plate Drawings used in this build for Sketchup 2015
http://chris-builds.com/images/plans/x27-mill-custom-parts.zip
^-- Pin & Bolt holes will most likely not match your mill as they appear to be hand drilled so modify where needed if you plan to use the files.
Ballscrew dimensions used in the build (Y axis was a little longer than needed but I was able to still use it)
http://chris-builds.com/images/plans/sieg-x27-ballscrews.jpg
Видео Sieg X2.7 Mill CNC Conversion - Part 2 - Y & Z Axis канала CT
I've built a handful of cnc routers and this would be my first mill cnc conversion.
Thanks for watching :)
More Images of this build
http://chris-builds.com/index.php/sieg-x2-7-mill-conversion
2D Plate Drawings used in this build for Sketchup 2015
http://chris-builds.com/images/plans/x27-mill-custom-parts.zip
^-- Pin & Bolt holes will most likely not match your mill as they appear to be hand drilled so modify where needed if you plan to use the files.
Ballscrew dimensions used in the build (Y axis was a little longer than needed but I was able to still use it)
http://chris-builds.com/images/plans/sieg-x27-ballscrews.jpg
Видео Sieg X2.7 Mill CNC Conversion - Part 2 - Y & Z Axis канала CT
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
G0704 CNC Conversion part 3 - Ball Screws and X/Y AssemblyOptimum BF20L CNC Conversion with a 3D PrinterTabletop Extrusion CNC Router Build - Part 2SIEG X2.7 Mini Mill - Setup and first useSieg SX2.7 Mill Cleanup - Part 1CNC LATHE?! - Router Add-On!X2 Mini Mill CNC Conversion- Part 1- DisassemblyMini Mill Modifications to DateMilling Machine to CNC Conversion - Precision Mathews Part 2Sieg X2.7 Mill CNC Conversion - Part 1 - X AxisBridgeport Retrofit KitGrizzly G0704 FULL CNC CONVERSION!Review - Sieg SX2.7 Bench Mill - Part 1Ballscrew Installation Benchtop MillENCO RF45 CNC Conversion - First 3 axis motion testHow to install NSK Linear products - 2. Ball ScrewCNC Conversion update, Z axis first test!Sieg SX2.7 Mill Cleanup - Part 2Usinage automatique 7075 T6 sur SIEG X3 CNC DIYMaking a Vise Stop Part 1