Eachine 011 Full Acro Firmware Installation - READ DESCRIPTION

Thank you to silverxxx, canino, notfastenuf and a host of others..

This is how to install the acro firmware for the e011 and have a full flight experience. Please do so at your own risk

You will need:
Hardware:
Mini ST Link V2. They are available from ebay, amazon, almost any of the chinese shipping companies:
https://www.amazon.com/DAOKI-ST-Link-Programming-Emulator-Downloader/dp/B01EE4WAC8/ref=sr_1_1?ie=UTF8&qid=1494785265&sr=8-1&keywords=st+link+v2+stlink Like this but you can find them much cheaper on ebay. I just assume this link will work for the longest to get an idea.

https://www.banggood.com/Eachine-E011-Mini-2_4G-Headless-Mode-With-60000RPM-716-Coreless-Motor-Toy-Brick-RC-Quadcopter-RTF-p-1135724.html?rmmds=search

ST Link utility:
http://www.st.com/en/embedded-software/stsw-link004.html

Software:
i used version 5.15 for Cortex M device
http://www2.keil.com/mdk5/legacy

ARMKeil:
https://www.keil.com/demo/eval/arm.htm

STM Link utility
http://www.st.com/en/embedded-software/stsw-link004.html

Acro or dual mode firmware:
https://www.rcgroups.com/forums/showpost.php?p=37357881&postcount=136

I hope this is all helpful. I included some FPV footage at the end but i cannot do any real flips, etc, inside yet without plowing into the ground. you will DEFINITELY want to click the rate button for the higher rates, it is very hard to control with the lower rates.
Please like/subscribe/comment, it's always appreciated and it helps me grow the channel. I hope you enjoyed and let me know if i can answer any questions.

Thanks again.

Видео Eachine 011 Full Acro Firmware Installation - READ DESCRIPTION канала Chris Sullivan