Revolutionising Wearer Seal Checks with the QuantiCheck
The OHD QuantiCheck is the world’s first quantitative user seal check device. Traditionally, user seal checks have been performed qualitatively by pressing the hand into the filter, inhaling slightly and holding a breath to see if the user can detect any leakages to ensure that an adequate seal has been achieved.
Designed to allow you to go above and beyond the set subjective standards for user seal checks, the QuantiCheck can increase health protection and limit liability by providing users the ability to quickly and easily perform a quantitative user seal check each time the mask is donned.
In this webinar, Dr Lynch and OHD Global President Luke Allen discuss how the QuantiCheck will revolutionise mask seal checks.
Webinar will feature:
*An introduction and background of wearer seal checks
*Applying technology with the QuantiCheck
*Overview of the QuantiCheck operation
*Advantages and benefits of using the QuantiCheck for mask seal checks
*QuantiCheck demonstration
*A Q & A session
For more information about the OHD QuantiCheck or Respirator Fit Testing, visit www.airmet.com.au or contact your local Air-Met Scientific office on 1800 000 744.
Видео Revolutionising Wearer Seal Checks with the QuantiCheck канала Air-Met Scientific Pty Ltd
Designed to allow you to go above and beyond the set subjective standards for user seal checks, the QuantiCheck can increase health protection and limit liability by providing users the ability to quickly and easily perform a quantitative user seal check each time the mask is donned.
In this webinar, Dr Lynch and OHD Global President Luke Allen discuss how the QuantiCheck will revolutionise mask seal checks.
Webinar will feature:
*An introduction and background of wearer seal checks
*Applying technology with the QuantiCheck
*Overview of the QuantiCheck operation
*Advantages and benefits of using the QuantiCheck for mask seal checks
*QuantiCheck demonstration
*A Q & A session
For more information about the OHD QuantiCheck or Respirator Fit Testing, visit www.airmet.com.au or contact your local Air-Met Scientific office on 1800 000 744.
Видео Revolutionising Wearer Seal Checks with the QuantiCheck канала Air-Met Scientific Pty Ltd
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
PortaGas PortaGreen Strip and Ship Calibration Gas Cylinder Return ProgramIntroducing the Radman2 Personal Radiation MonitorDemonstration of the Narda RadMan 25G in a Nutshell - The BasicsIn The Spotlight | Gas Detection Made Easier Through Advanced Safety Features WebinarHow To Create A Template In 3M DMS SoftwareCharacterising Groundwater Flow Velocity & Preferential Zone Using The Geotech Colloidal Borescope5G Extrapolation to Actual Maximum ExposureHow to Measure 5G NR Service with SRM-3006?Performance Criteria For Lower Cost Air Quality Monitoring Systems How Near Is Near Reference?September Headlines In Hygiene Air SamplingMinimising Respirable Dust Exposure With DustCanary Real-Time Dust MonitoringNear Real Time Multiparameter Monitoring & Data CapturingDetecting and Neutralising Hexavalent Chromium with HexChecksHow to Customise Your Equipment List View in iNet ControlDemonstration of the ERS CO2 Monitor with LiveSenseOur Purpose | Air-Met ScientificUsing the Narda RadMan 2XT to detect RF Hazards01dB Noise Inspector Acoustic Camera Solution In ActionRespirator Fit Testing with Controlled Negative Pressure