Binding and Fine Tuning FrSky based receivers (Jumper R1F)

Published April 2021

In this video I go over the binding process for a Jumper R1F receiver with a TX16S radio.
There's also a section for fine tuning the receiver signal, which is particularly important with this jumper receiver.
The Jumper R1F is a FrSky D16 based receiver, and the binding and fine tuning process is very similar, the difference may lay in the blinking pattern of the lights.

Chapters:

0:00 - Intro
2:20 - How to bind a FrSky based receiver
5:11 - Fine tuning the receiver
7:02 - Betaflight configuration for the Jumper R1F

You can buy this receiver and other from: https://nordfpv.com/products/jumper-r1-receiver-frsky-d16-1?_pos=1&_sid=f916b5456&_ss=r

Nordfpv t-shirts and other original products can be found: https://nordfpv.com/collections/nordfpv-originals

The main URL for the shop: https://nordfpv.com/

Видео Binding and Fine Tuning FrSky based receivers (Jumper R1F) канала NordFPV