How to Make a Super FAST Jump Ring Winder for Chain Mail, Jewelry, and more! | Plans Available

Make long coils of jump rings with this DIY jig. Using just plywood, bolts, bearings, and your drill amaze your friends with all the coils.

Plans: https://www.builditmakeit.com/store/p/jump-ring-coiling-jig-plans
or: https://builditmakeit.etsy.com

MATERIALS
18mm or 3/4” plywood
608 skate bearings: https://geni.us/mrmCp6o (Amazon)
1m or 3’ steel rod (can accommodate 1.3m and 4’ as well)
Hardwood or plywood ~50mm/2” x 110mm/5” x 12mm/1⁄2”
5/16-18 x 1” Hex Cap Screws: https://geni.us/rwvHz (Amazon)
Washers (Max OD 17mm or 11⁄16”): https://geni.us/ezqrfih (Amazon)
Wood glue: https://geni.us/rTTXfxa (Amazon)
2” Screws: https://geni.us/W8nOs (Amazon)
1” Screws: https://geni.us/6u9TZO (Amazon)

OPTIONAL
Pocket Hole Jig and Screws: https://geni.us/3fZakuw (Amazon)
Foot Speed Controller: https://geni.us/xZwavr (Amazon)
V-groove Bearings (need shims or larger bolt as well): https://geni.us/LNXZQ (Amazon)

RECOMMENDED TOOLS
Table saw (or a band saw)
Drill
Counter Sink Bit
Circle Maker: https://geni.us/MVdsyi (Amazon)

OPTIONAL
5/16-18 tap: https://geni.us/LtByy (Amazon)
Band Saw or Jig saw or hand saw
Brad nailer (or hammer and finish nails)

Build It Make It Links:
----------------------------------------------------
Website: https://builditmakeit.com
Etsy Shop: https://etsy.com/shop/BuildItMakeIt
Instagram: https://instagram.com/builditmakeit/
Thingiverse: https://www.thingiverse.com/builditmakeit/designs

Thanks for the music from StreamBeats check them out - https://www.youtube.com/channel/UCQ6hCusHlsIDXqoTbbTHSUQ

Links may be affiliate thinks.

Chapters:
0:00 Intro
0:21 Materials
0:45 Plywood Cuts
1:45 Drill Carriage
3:28 Base
3:47 Bushing Holder
4:25 Mounting the Drill
5:56 Bushing
6:39 V-groove
7:17 Steel Rods
7:44 Speed Control
8:18 Winding
9:10 Outtakes

#chainmail #woodworking #armor

Видео How to Make a Super FAST Jump Ring Winder for Chain Mail, Jewelry, and more! | Plans Available канала Build It Make It