Radius Ball Turner MKll - Boring Head/Tool Post Version, Part Two
We continue with the rest of the build -- making an end boss, drilled and tapped for a handle and set screw - a handle and knob with drilling and tapping to suit . Plus we mill a small flat on the end of the operation shaft to allow positional locking with the boss set screw.. It is hoped soon to do a separate video with the tool in use, prior to which we will either regrind the boring bar tool insert to better geometry and/or, make a dedicated cutting as well from drill rod.
Видео Radius Ball Turner MKll - Boring Head/Tool Post Version, Part Two канала ChrisB257
Видео Radius Ball Turner MKll - Boring Head/Tool Post Version, Part Two канала ChrisB257
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
MKll Radius Ball Turner - Final!Toolpost Grinder Attachment 2DIY Line Boring Tool50mm MT3-M12 Morse Taper Boring Bar [boring head] banggood Unboxing, Review and first testOptimum drehmaschine radius drehenRadius Ball Turner MKll - Re-tooledBall Turning on a Lathe using a Boring HeadMKll Radius Ball Turner - Vertical VersionBall Turning on a latheRadius Cutter for Lathe ( Utensile per le torniture sferiche)Radius Cutter for the lathe.Ball Turner Part for Keith Fenner's What's In Your BoxLathe cross feed conversion to a ball screw.Air Head BMW Cylinder Boring from 82mm to 90mmBohrgerät für die Drehbank|Drill for the lathe|Alles.HandarbeitValve Ball Turning MachineMaking A Ball Turner From a Boring Head: Machinist ToolsVertex automatic boring head vbhu. Vertex avarruspää vbhu.Boring Head Tailstock Offset