Ford Mondeo mk3 st220 K&N induction kit install, how to.

So as requested many times, in this video i show how i installed my K&N induction kit into the wing on my Ford mondeo mk3 st220, you can use this to install any induction kit onto a mondeo mk3.

The kit I use is a K&N 57i kit that come with the mass air flow sensor adaptor, the induction filter itself and a few jubilee clips. The stainless steal pipes was 76mm diameter and 45 degree bend you will also need a straight silicon hose at 76mm diameter as well as a 45 degree silicon hose as well at 76mm diameter and a bunch of jubilee clips.

I would recommend removing the passenger wheel and wheel arch liner just to make this a bit easier. I done it this way to show that it can be done with the wheel still in place.

**TimeStamps**
0:00 - Ford mondeo mk3 st220 induction kit install
2:12 - Removal of the stock air box
11:11 - Installing the K&N 57i induction kit

Buy a K&N 57i kit here: https://ebay.us/OJ7SKR or a K&N stock panel filter here: https://ebay.us/ErUbhr (this one just replaces the stock air box panel filter)

Buy the 45 degree silicon hoses:
Blue - https://ebay.us/akTSvM
Black - https://ebay.us/wCg9A9
Red - https://ebay.us/4gKy77
Buy the Straight hose: https://ebay.us/OhWwJQ
Buy the 45 degree stainless steal pipe: https://ebay.us/s5EHos

If your a new Viewer please consider Subscribing so you don't miss what i get up to and if your returning leave a thumbs up for support, thanks:
https://www.youtube.com/c/ChazzCoombes?sub_confirmation=1

Share this video with a mate:
https://youtu.be/BGas_2scSOU

**If the video was helpful, leave a "thumbs up" and consider subscribing**

If doing these projects you do so at your own risk. If after watching any video you still feel unsure please seek the help of your local garage.

Видео Ford Mondeo mk3 st220 K&N induction kit install, how to. канала Chazz Coombes