How to Bring the Sliding Gate Automation System Up to Code?

What steps should I follow to bring my sliding gate automation system up to code?

Safety regulations for sliding gates
To ensure the safety of your sliding gate, it is essential to comply with precise safety regulations. These steps are fundamental to protecting both people and surrounding property.

1. Installation of photocells
A primary element in bringing the automation system up to code is the installation of photocells. It is advisable to include at least two pairs of photocells:
- One photocell inside the gate opening
- One photocell outside, to monitor the opening area

2. Safety edges
In addition to photocells, safety edges must be installed. These devices detect the presence of objects or people in the gate's path, preventing accidents during opening and closing.

3. Calibration of motor force
Calibration of the force is a crucial step that varies depending on the type of motor used:
- Motors with inverters and encoders: These motors operate at 24 volts and are equipped with amperometric detection systems. During operation, if the gate encounters an obstacle, the motor detects the force on the obstacle and automatically reverses.
- 230-volt motors: These direct motors without inverters and encoders require calibration via electronic clutch. It is important to adjust carefully to ensure the gate does not close if it encounters an obstacle.

Conclusions
Following these steps to bring your sliding gate automation system up to code is essential to ensure safe and effective operation. Make sure to install photocells, safety edges, and properly calibrate the motor force according to the type of system you own. This way, you can enjoy a safe and compliant sliding gate in accordance with current regulations.

Видео How to Bring the Sliding Gate Automation System Up to Code? канала DIEFFEMATIC - Il portale dell' AUTOMAZIONE