Basic Load Paths
Have you ever had an inspector tell you to add a strap (tension tie) to some framing for a “positive connection” and when you asked what that meant, you got a non answer? Truth is it took me a ton of time to find a definition and reference.
In wood framed light construction we’ve become very good at constructing strong buildings that are proving to be very resilient to earthquakes and hurricanes. Fully sheathing our walls contributes greatly to this, but another important component in framing is the load path.
We instinctively understand some load paths. If we have an opening in a wall and a floor or roof above it, we bridge that opening with a header. That header transfers the loads from above to columns or framing that bear on something else, e.g. floor, foundation wall, etc that will transfer that load to the ground. One comment on a webinar by the Engineered Wood Association was that one way or another a load will meet the ground, either through transfer of structural members or building collapse.
Over the years in the field I would have a inspector point out where I had missed “positive connections” between structural members and I didn’t always understand what he was referring to. Thankfully our engineer walked a house I framed and took the time to explain it to me.
Where I live and work, we build to the International Residential Code (2015 currently). R301.1 Application states “Buildings and structures, and parts thereof, shall be constructed to safely support all loads, including dead loads, live loads, roof loads, flood loads, snow loads, wind loads and seismic loads as prescribed by this code. The construction of buildings and structures in accordance with the provisions of this code shall result in a system that provides a complete load path that meets the requirements for the transfer of loads from their point of origin through the load-resisting elements to the foundation. Buildings and structures constructed as prescribed by this code are deemed to comply with the requirements of this section.” (bold mine)
check out the full article here https://www.awesomeframers.com/blog
Check out AwesomeFramers Logo! https://tspr.ng/c/awesomeframers-logo
https://www.instagram.com/awesomeframers/
https://pioneerbuildersonline.com/
https://www.jlconline.com/search?q=Tim+Uhler
https://www.strongtie.com/coiledstraps_specialtystraps/cshp_strap/p/cshp
https://www.facebook.com/strongtie/posts/3089182587761592
https://www.linkedin.com/feed/update/urn:li:activity:6648584310733496320
https://twitter.com/strongtie/status/1242826566175838210
Видео Basic Load Paths канала AwesomeFramers
In wood framed light construction we’ve become very good at constructing strong buildings that are proving to be very resilient to earthquakes and hurricanes. Fully sheathing our walls contributes greatly to this, but another important component in framing is the load path.
We instinctively understand some load paths. If we have an opening in a wall and a floor or roof above it, we bridge that opening with a header. That header transfers the loads from above to columns or framing that bear on something else, e.g. floor, foundation wall, etc that will transfer that load to the ground. One comment on a webinar by the Engineered Wood Association was that one way or another a load will meet the ground, either through transfer of structural members or building collapse.
Over the years in the field I would have a inspector point out where I had missed “positive connections” between structural members and I didn’t always understand what he was referring to. Thankfully our engineer walked a house I framed and took the time to explain it to me.
Where I live and work, we build to the International Residential Code (2015 currently). R301.1 Application states “Buildings and structures, and parts thereof, shall be constructed to safely support all loads, including dead loads, live loads, roof loads, flood loads, snow loads, wind loads and seismic loads as prescribed by this code. The construction of buildings and structures in accordance with the provisions of this code shall result in a system that provides a complete load path that meets the requirements for the transfer of loads from their point of origin through the load-resisting elements to the foundation. Buildings and structures constructed as prescribed by this code are deemed to comply with the requirements of this section.” (bold mine)
check out the full article here https://www.awesomeframers.com/blog
Check out AwesomeFramers Logo! https://tspr.ng/c/awesomeframers-logo
https://www.instagram.com/awesomeframers/
https://pioneerbuildersonline.com/
https://www.jlconline.com/search?q=Tim+Uhler
https://www.strongtie.com/coiledstraps_specialtystraps/cshp_strap/p/cshp
https://www.facebook.com/strongtie/posts/3089182587761592
https://www.linkedin.com/feed/update/urn:li:activity:6648584310733496320
https://twitter.com/strongtie/status/1242826566175838210
Видео Basic Load Paths канала AwesomeFramers
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![How to Frame Portal Walls](https://i.ytimg.com/vi/ZHUe_V8L3Pw/default.jpg)
![](https://i.ytimg.com/vi/THqhEzGOFjE/default.jpg)
![How to Pull Nails](https://i.ytimg.com/vi/6zUm4UD3jpI/default.jpg)
![Analyzing different loads on structures such as buildings](https://i.ytimg.com/vi/H_pcXM9qyDo/default.jpg)
![How to Form Tall Foundation Walls](https://i.ytimg.com/vi/NdIx7Vm_3xs/default.jpg)
![Milwaukee gun youtube](https://i.ytimg.com/vi/A9uQCfb9TA0/default.jpg)
![How To Build a 24 Ft Projection Patio Cover Ultra](https://i.ytimg.com/vi/y84yXcGQ3HA/default.jpg)
![Screws Instead of Hurricane Ties?](https://i.ytimg.com/vi/Xtg3CJtytRA/default.jpg)
![How to Frame a Cove Ceiling part 3](https://i.ytimg.com/vi/RPg1QaKaEys/default.jpg)
![Load Bearing Wall Framing Basics - Structural Engineering and Home Building Part One](https://i.ytimg.com/vi/a9UOwDjBZH0/default.jpg)
![Stair Layout and Framing](https://i.ytimg.com/vi/irQMclvmXbA/default.jpg)
![Exposed Aggregate Front Porch Part 1](https://i.ytimg.com/vi/wkHaU4Xecjo/default.jpg)
![How to attach wood to a concrete floor IN SECONDS! How to attach 2x4 wood to concrete floor fast!](https://i.ytimg.com/vi/5cp-ZsLZQnk/default.jpg)
![Carpentry 101: Basics of Wood Framing with MattBangsWood [#1]](https://i.ytimg.com/vi/y8W7KbJTg7A/default.jpg)
![How to Layout Stepped Footings](https://i.ytimg.com/vi/UxMQ7wp_abE/default.jpg)
![How to Properly Flash a Window](https://i.ytimg.com/vi/i2LyNX-bXKA/default.jpg)
![The Best Way to Install Subfloor](https://i.ytimg.com/vi/a9xR9ZUcQ8g/default.jpg)
![How Structural load & load paths work](https://i.ytimg.com/vi/spugqjcuPiU/default.jpg)
![The Idiot Proof Way To Reduce Thermal Bridging](https://i.ytimg.com/vi/ZkgJ7BzrQp8/default.jpg)
![Installing LVL Beams During a Residential Remodel](https://i.ytimg.com/vi/poBtAmMwXzE/default.jpg)