Remove PPF From Tesla Bumper Sensors After Install

This video is a tutorial on how to remove the PPF from the sensors on the front bumper after you've installed the bumper kit on the Tesla Model 3/Y.

Installing a kit with pre-cut sensor holes can sometimes lead to alignment issues when stretching the film. This can make installation much more difficult.

To make installation easier, we remove the holes from the pattern before we computer cut the kit and then, using our template, cut the holes by hand once the kit has been installed.

All of our front bumper kits come with these sensor templates. You can purchase a variety of XPEL paint protection film kits for Tesla Model 3 & Y on our website at https://www.renoson.com/tesla-model3-paintprotection-film

WE SHIP WORLDWIDE!

Be sure to like and subscribe for more tutorials and follow us on social media:

FB: facebook.com/renosonindustries
IG: instagram.com/renosonindustries

0:13 - Introduction
1:22 - Sensor Templates
1:43 - Applying template
2:39 - Cutting guidelines
3:52 - Cutting the hole using the template
4:51 - Removing the template and the film
5:45 - Removing the air and sealing the edges
6:56 - Outro

#renoson #renoson

Видео Remove PPF From Tesla Bumper Sensors After Install канала Renoson Auto Films