Klipper and the RPI-zero, Low Cost Remote Printer Control!
Got an old RPIzero you picked up awhile back to hit the limit for free shipping? Put that thing to use and get a great light weight, low cost klipper interface in the process. (helpful links and commands at the bottom)
If you like what you see and want to help support the channel
https://www.patreon.com/Nero3dp
https://www.buymeacoffee.com/Nero3dp
Looking for a great first 3d printer? Grab an Ender 3 V2 from the affiliate link below, get a great deal on a machine AND help the channel out in the process.
https://www.banggood.com/custlink/vmKyZpVLJP
Need filament or a printer? Purchase anything from MatterHackers with the link below and a portion of the sale goes to supporting the channel
http://www.matterhackers.com?aff=7543
I NOW HAVE A TWITTER, follow me @ https://twitter.com/3dpNero
Resources:
-https://community.octoprint.org/t/simple-3-wire-serial-connection-from-pi3-to-skr-v1-3-board/10166
-https://github.com/KevinOConnor/klipper/issues/2100
1. Swapping ports used by GPIO and Bluetooth
sudo nano /boot/config.txt
Move the cursor to the very end and add:
dtoverlay=pi3-miniuart-bt
2. Disabling the serial console
sudo nano /boot/cmdline.txt
Look for following string (text) and delete it
console=serial0,115200
3. Raspi-config stuff
sudo raspi-config
Go to 'Interfacing Options'
Then P6 - Serial
Then No
Then Yes
Then go down to finish and reboot.
4. Rebuild your Klipper MCU firmware, unselecting "Use USB for communication (instead of serial). Flash updated firmware to your board
5. Update your printer.cfg:
serial: /dev/ttyAMA0
Видео Klipper and the RPI-zero, Low Cost Remote Printer Control! канала Nero 3dp
If you like what you see and want to help support the channel
https://www.patreon.com/Nero3dp
https://www.buymeacoffee.com/Nero3dp
Looking for a great first 3d printer? Grab an Ender 3 V2 from the affiliate link below, get a great deal on a machine AND help the channel out in the process.
https://www.banggood.com/custlink/vmKyZpVLJP
Need filament or a printer? Purchase anything from MatterHackers with the link below and a portion of the sale goes to supporting the channel
http://www.matterhackers.com?aff=7543
I NOW HAVE A TWITTER, follow me @ https://twitter.com/3dpNero
Resources:
-https://community.octoprint.org/t/simple-3-wire-serial-connection-from-pi3-to-skr-v1-3-board/10166
-https://github.com/KevinOConnor/klipper/issues/2100
1. Swapping ports used by GPIO and Bluetooth
sudo nano /boot/config.txt
Move the cursor to the very end and add:
dtoverlay=pi3-miniuart-bt
2. Disabling the serial console
sudo nano /boot/cmdline.txt
Look for following string (text) and delete it
console=serial0,115200
3. Raspi-config stuff
sudo raspi-config
Go to 'Interfacing Options'
Then P6 - Serial
Then No
Then Yes
Then go down to finish and reboot.
4. Rebuild your Klipper MCU firmware, unselecting "Use USB for communication (instead of serial). Flash updated firmware to your board
5. Update your printer.cfg:
serial: /dev/ttyAMA0
Видео Klipper and the RPI-zero, Low Cost Remote Printer Control! канала Nero 3dp
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Klipper 3d Printer Firmware - What is it? Why do I want it?](https://i.ytimg.com/vi/iNHta6zljoM/default.jpg)
![INPUT SHAPER CRASH COURSE - Print FASTER and BETTER!](https://i.ytimg.com/vi/OoWQUcFimX8/default.jpg)
![Phaetus Dragonfly - The best not best hotend?](https://i.ytimg.com/vi/JOOow-SwVHk/default.jpg)
![Solving Gantry Racking](https://i.ytimg.com/vi/cOn6u9kXvy0/default.jpg)
![](https://i.ytimg.com/vi/9ybQ9FQqXAc/default.jpg)
![Unboxing The Fysetc Spider - Best Klipper Board Yet?](https://i.ytimg.com/vi/WGGNzl2iudw/default.jpg)
![Is the Raspberry Pi 4 really that bad?](https://i.ytimg.com/vi/pOboAW5RqAg/default.jpg)
![MainsailOS installation Guide-Goodbye Octoprint! (works with fluidd too)](https://i.ytimg.com/vi/MK0-MDVJG94/default.jpg)
![Using a 32 bit Raspberry Pi to boost your 3D printer mainboard - Klipper Ender 3 guide](https://i.ytimg.com/vi/yAfalR7-Tvw/default.jpg)
![Klipperizing the Ender3 V2 Livestream - Installing klipper and pushing it to the limit!](https://i.ytimg.com/vi/jkEl_hjc9xc/default.jpg)
![Paneldue with Klipper- How to make it work (its easy)](https://i.ytimg.com/vi/G7yqrAaUMPw/default.jpg)
![BTT Octopus - This Controller Has (almost) EVERYTHING](https://i.ytimg.com/vi/qOvxQm2UIMg/default.jpg)
![Voron V1.8 "Toasty Boi" Serial Video](https://i.ytimg.com/vi/FKiDochslzo/default.jpg)
![ABS For Dummies PART 1- PREP FOR SUCCESS](https://i.ytimg.com/vi/XZgt3Ijno78/default.jpg)
![Klipper Initial Setup : Making sure things are all good before printing](https://i.ytimg.com/vi/T-knWbh1Gg8/default.jpg)
![MAX OUT ACCELERATION - Find your printers limit with input shaper!](https://i.ytimg.com/vi/IezqWVZZ_iI/default.jpg)
![Cast Aluminum Printer Bed - Putting together the best DIY print platform for your 3d printer](https://i.ytimg.com/vi/vZx4vfevwx4/default.jpg)
![Klipper Pressure Advance Tuning MADE EASY!](https://i.ytimg.com/vi/LtG--ev3-4s/default.jpg)
![Ender 6 - Klipper on SKR Board with stock touchscreen](https://i.ytimg.com/vi/t1FgE3OgUA8/default.jpg)
![Klipper Pre-Flight Checklist - Don't Forget These Steps!](https://i.ytimg.com/vi/-aPiY6ilaWM/default.jpg)