Recycle Your Old Motors: A Step by Step Guide

How to recycle electric motors?
BSGH 3T manufacturer provides you one-stop motor recycling solution.

1. First, you can use BSM-50 motor cutting machine to cut the scrap motors.
The flat blade is used for removing the motor shell.

2. Then we can use the sharp blade to cut the motor stator in half.
(This step also can be replaced by our multifunctional BSM-40 electric motor recycling machine.

BSM-40 motor wrecker has one cutting part and three pulling parts.

For small motors, we can use BSM-40 to cut one end of the motor stator. )

3. Finally, the claws can easily pull complete copper winding wires out.

BSM-40 electric motor recycling machine is suitable for different sizes of waste motor stator diameters ranging from 90 to 250mm.

This motor wrecker is also equipped with a hydraulic pulling part for recycling large motors, more powerful.

And there's a lifter that can help move big motors up and down.

If you need detailed technical data on these two motor wreckers, please contact us:
WhatsApp: +86 13772508206 (Jocy)
Email:coppergranulator@bsghrecycling.com
***************************************

0:00-0:16: Remove the motor shell;
0:17-0:31: Divide motor stator in half;
0:32-0:39: Cut one end of the motor stator;
0:40-0:48: Extract the copper windings;
0:49-0:58: Show the 16-claws puller;
0:59-1:17: Demonstrate the hydraulic pulling part and the lifter;

Видео Recycle Your Old Motors: A Step by Step Guide канала 3T Scrap Motor Recycling Machine