How to Build a Homemade Leaf Vacuum for $50 - DIY

Do you need to collect a LOT of leaves? Most commercial leaf collectors are too small to efficiently collect large amounts of leaves. The problem with the store-bought mowers is that the leaf collection area is too limited, and you have to empty the container again and again in order to cover your entire yard.

So why waste your time with ineffective tools? A little bit of engineering can solve the problem much better and with less repetitive emptying and reloading cycles.

In this video, I will show you how to build a DIY homemade leaf vacuum collector for $50 that can collect many more leaves in one pass-through than the original model. This custom-built trailer replaces the one that comes with the mower, and attaches easily to the mower.

Use the power of DIY to save yourself some time!

Parts List:
-1/2 inch Plywood 3ftx4ft
-2x2s, 8ft long, roughly 10 total
-Roll of "deer netting" or chicken wire.
-8in vent piping 5ft
-8in vent elbow
-3 small hinges
-1/4 inch 5x36 inch board for door.

Видео How to Build a Homemade Leaf Vacuum for $50 - DIY канала HowToLou