Stress Concentrations and Finite Element Analysis (FEA) | K Factors & Charts | SolidWorks Simulation
LECTURE 27:
Playlist for ENGR220 (Statics & Mechanics of Materials):
https://www.youtube.com/playlist?list=PL1IHA35xY5H5sjfjibqn_XFFxk3-pFiaX
This lecture was recorded on November 6, 2019. All retainable rights are claimed by Michael Swanbom.
Please subscribe to my YouTube channel and follow me on Twitter: @TheBom_PE
Thank you for your support!
Видео Stress Concentrations and Finite Element Analysis (FEA) | K Factors & Charts | SolidWorks Simulation канала TheBom_PE
Playlist for ENGR220 (Statics & Mechanics of Materials):
https://www.youtube.com/playlist?list=PL1IHA35xY5H5sjfjibqn_XFFxk3-pFiaX
This lecture was recorded on November 6, 2019. All retainable rights are claimed by Michael Swanbom.
Please subscribe to my YouTube channel and follow me on Twitter: @TheBom_PE
Thank you for your support!
Видео Stress Concentrations and Finite Element Analysis (FEA) | K Factors & Charts | SolidWorks Simulation канала TheBom_PE
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Introduction to Fatigue: Stress-Life Method, S-N Curve
Bending Moments & Shearing Forces in Beams by Cutting & FBDs | Piecewise Functions | Sign Convention
Learn SolidWorks Simulation in Under 11 Minutes Tutorial
Solidworks tutorial | Design and Assembly of Bicycle in Solidworks
Understanding Failure Theories (Tresca, von Mises etc...)
Understanding Material Strength, Ductility and Toughness
Bullet impact | Non linear dynamic analysis via Solidworks
Increasing Material Strength w/ Cold Work/Plastic Deformation; True vs. Engineering Stress & Strain
Practical Introduction and Basics of Finite Element Analysis
Solidworks Simulation tutorial | Steel Structure Simulation in Solidworks
Torsional Stress: Torsion Formula Derivation & Polar Second Moment of Area (Polar Moment of Inertia)
Rolling Element Bearings: Choosing Ball Bearing Size for Life & Reliability in Axial & Radial Load
SOLIDWORKS World 2014 - FEA Theory and Simulation
V & M DIAGRAMS: Rules for Sketching Shearing Force & Bending Moment Plots by Analyzing Area & Slope
01 - Solidworks Simulation flexion simple
Position Control of Features & Patterns: PLTZF & FRTZF | How Rule 1 of GD&T Controls Form | MMC, LMC
Finite Element Method (FEM) - Finite Element Analysis (FEA): Easy Explanation
Stress-Strain Relations: Tensile Testing, Yield & Ultimate Strengths, Elastic Modulus, Safety Factor
Euler's Buckling Formula for Long Compressive Members | End Constraints and Effective Length
Finding Factor of Safety with Maximum Shear Stress Static Failure Theory | 1 & 2 Plane Shaft Bending