Scientific Glassblowing Training - stirrer
Take two pieces of 300 mm long 6mm rod one piece in each hand, rotate the ends of both rods in the flame, melt the very end of the rod in the right hand and press it onto the end of the rod in the left hand, pull back slightly to keep the diameters similar. Repeat the operation to make a rod of equal length on each side of the rod in the left hand. By rotaing and using gravity gather the rods, hold the gather vertically and press with wide bladed tweezers the turn at 45°. Repeat on the other side.
Flame anneal in a cooler flame.
Видео Scientific Glassblowing Training - stirrer канала johntheglass
Flame anneal in a cooler flame.
Видео Scientific Glassblowing Training - stirrer канала johntheglass
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
scientific glassblowing - training - paddleScientific Glassblowing training - "Olives" in 6mm borosilicate rodmagnificent discharge tubeheathway tilting lathe movieScientific Glassblowing - training - Flame polishing - 8mm borosilicate RodScientific Glassblowing training - manipulation Practise - twistScientific glassblowing training - Bulb at end of tubescientific glassblowing training - pulling a point -10mm borosilicate tubingScientific Glassblowing Training - Join 10mm borosilicate tubeScientific Glassblowing training " Button " - used to make a button sealscientific glassblowing training - pull a point from 26mm tubescientific glassblowing training - stirrer movie- borosilicateScientific Glassblowing Training - "manipulation practise" - gatheracom 2000a testpower master power meter testScientific Glassblowing Training - Manipulation Practise - elephants trunk