ClicBot upgrade (very inexpensive) - designing a third wheel for the ClicBot robot

ClicBot gets a very inexpensive upgrade - I upgrade my ClicBot starter kit, allowing me to design 3-wheeled robots by adding 1 part I designed myself. The part required me to glue 2 components together - THIS SHOULD ONLY BE COMPLETED BY A COMPETENT ADULT.

The parts featured in the video are a Ball Transfer Bearing Unit (8mm Diameter) and a Hexagonal nut (1/4 inch-20). Simples!

Thank you to Robocube for the use of ClicBot.
Visit http://www.robocube.co.uk for more details.
Direct link - https://www.robocube.co.uk/collections/clicbot

-----------------------------------------------------

Support the channel – follow the link below to go to my Amazon storefront (for STEM-related toys, gifts, supplies and items featured in my videos).

https://www.amazon.co.uk/shop/mrsmithsphysicsonline

Like the channel art? I got it from fiverr.com – follow the link below for 20% off your first order.

http://www.fiverr.com/s2/f00106b344

Note – I earn a small percentage of any purchases made through the above links, which helps keep the channel going. Good news – it doesn’t cost you any more!

Many thanks to Robocube for supplying ClicBot in order for me to make the video.

-----------------------------------------------------

Chapters...
0:00 Introduction
0:41 Design of ClicBot's third wheel
1:51 Putting ClicBot's third wheel together
2:38 Attaching ClicBot's third wheel
3:51 Creating a demo motion with ClicBot
5:15 Creating a rotation motion with ClicBot
6:40 Creating a steering motion with ClicBot
10:29 Controlling ClicBot using programmed motions

-----------------------------------------------------

#stem #steam #education

Видео ClicBot upgrade (very inexpensive) - designing a third wheel for the ClicBot robot канала Stem goals with Mr Smith