INSTRUCTION ON HOW TO USE WH1436A TEMPERATURE CONTROLLER Step by step (07.31.19 Updated Version)
Email surport: service@bayite.com.
Buy from Amazon: https://www.amazon.com/dp/B00V4TJR00
Manual download: https://bit.ly/2K50vak
The last version temperature controller need set HC, Lb, Hb
3 parameters. In new version, HC is removed, Lb & Hb are replaced by ON & OFF.
Someone says that I just want to keep temperature at a piont. For example, I want to turn off a device once temp is over 100F and turn on the device once temp is below 100F. Well, in order to keep the temperature closest to a single point we must first understand that the device works based on trigger on and off points. Since these trigger points cannot be the same we must choose the minimum value for the range such as a trigger on point of 99.9 and a trigger off point of 100, this combination would ideally keep the temperature closest to 100.
Видео INSTRUCTION ON HOW TO USE WH1436A TEMPERATURE CONTROLLER Step by step (07.31.19 Updated Version) канала Bayite Amazon
Buy from Amazon: https://www.amazon.com/dp/B00V4TJR00
Manual download: https://bit.ly/2K50vak
The last version temperature controller need set HC, Lb, Hb
3 parameters. In new version, HC is removed, Lb & Hb are replaced by ON & OFF.
Someone says that I just want to keep temperature at a piont. For example, I want to turn off a device once temp is over 100F and turn on the device once temp is below 100F. Well, in order to keep the temperature closest to a single point we must first understand that the device works based on trigger on and off points. Since these trigger points cannot be the same we must choose the minimum value for the range such as a trigger on point of 99.9 and a trigger off point of 100, this combination would ideally keep the temperature closest to 100.
Видео INSTRUCTION ON HOW TO USE WH1436A TEMPERATURE CONTROLLER Step by step (07.31.19 Updated Version) канала Bayite Amazon
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
bayite necklace pendant for flex 2. How to put the trackerIMG 7975What does cut-off pressure mean for a diaphragm water pump, bayite 12V diaphragm water pumpBAYITE 4M630 Installation Guide How to apply screen protector for fitbit versabayite Stainless Steel Chain Links Bands for Fitbit Blaze, with Framebayite TPU screen protector for fitbit blaze, how to apply, no bubblesremove the stuck band off the trackerbayite Ferrocerium rod, bayite ferro rod, it's important to use good scraperbayite 4H502: watch this video if you have difficulty taking the band off fitbit charge 2bayite BTC201 BTC211 temperature controller, programming instruction(how to set)how to install the fitbit blaze bandINSTRUCTION ON HOW TO USE WH1436A(old version) TEMPERATURE CONTROLLERbayite Milanese Mesh Bands for Fitbit Alta and Fitbit Alta HRbayite milanese mesh bands for fitbit versa reviewhow to adjust watch bands if it's still too large at the last groovehow to remove the pin with broken latch on fitbt blaze framebayite milanese bands for fitbit charge 2bayite tempered screen protector for fitbit blaze, how to apply, instructionsajust bayite 4H206 replacement metal bands for fitbit altaajust bayite metal band for fitbit alta, backup methodsbayite How to set Willhi Wh1436 Temperature Controller Switch NTC Sensor Pre-wired Plug and Use