Building an Extension #6 - Joists and Steels
In Part 6 of The Extension series, which follows the build of a side and rear extension on a semi-detached property, we see the joists and steels slotted into position in preparation for the removal of a load bearing wall at the back of the house.
The wall is being knocked out to extend the existing kitchen and create a kitchen/diner on the ground floor and an additional bedroom on the first floor.
This episode includes:
- Cutting joists to fit the steel beam
- Spacing the joists out with noggings and the challenges associated installing joists and steels.
- Using Strongboys to support the outer and inner skin at the same time
- Trimming the existing floor joists so they can sit in the web of the steel beam
- Cutting out the brickwork
- Lining up the holes of the two steel beams
- Bolting timber on to the steel beam for the jiffy hangers
- Expansion joints
- Insulation
- Using jiffy haners/joist hangers
This episode features products from: Evolution; Snickers Workwear; Milwaukee; Fein; Bosch; Arbotech; Stabila; Ecotherm; Teco and Rhino Scaffolding.
===================================================
Don't forget to stay up to date with Skill Builder!
Get in touch and send us your pictures and videos - http://skill-builder.uk/send
Join our mailing list - http://skill-builder.uk/join
See our Tweets - https://twitter.com/skillbuilderuk
See our Facebook Page - https://www.facebook.com/skillbuilderchannel
Видео Building an Extension #6 - Joists and Steels канала Skill Builder
The wall is being knocked out to extend the existing kitchen and create a kitchen/diner on the ground floor and an additional bedroom on the first floor.
This episode includes:
- Cutting joists to fit the steel beam
- Spacing the joists out with noggings and the challenges associated installing joists and steels.
- Using Strongboys to support the outer and inner skin at the same time
- Trimming the existing floor joists so they can sit in the web of the steel beam
- Cutting out the brickwork
- Lining up the holes of the two steel beams
- Bolting timber on to the steel beam for the jiffy hangers
- Expansion joints
- Insulation
- Using jiffy haners/joist hangers
This episode features products from: Evolution; Snickers Workwear; Milwaukee; Fein; Bosch; Arbotech; Stabila; Ecotherm; Teco and Rhino Scaffolding.
===================================================
Don't forget to stay up to date with Skill Builder!
Get in touch and send us your pictures and videos - http://skill-builder.uk/send
Join our mailing list - http://skill-builder.uk/join
See our Tweets - https://twitter.com/skillbuilderuk
See our Facebook Page - https://www.facebook.com/skillbuilderchannel
Видео Building an Extension #6 - Joists and Steels канала Skill Builder
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Building an Extension #7 - Roof Build-up & 3 4 5 RuleInstalling rsj steel beams and floor joistsHow to plaster board a steel beam.Building Luxury House Extension From Start To FinishLoft Conversion Part 2 - Cutting & fitting the joists. Joist installation.Laying Bricks & Shifting Steel - 35A Extension #3Kitchen extension start to finishHow To Remove a Supporting Internal WallCustom Home Builder Tips - Setting Steel Beams - Divak DevelopersBricklaying - How To Do Foundations For House ExtensionBuilding an Extension #8 - Cutting Roof TimbersInstalling steel beams rsjHow to install a steel beam in a loftBuilding an Extension #5 - Up to the joistsConcrete Foundations - 35A Extension #1Building an Extension #9 - Ardex Rapid Dry ScreedInstalling a Load-Bearing BeamBuilding an Extension #10 - Soffits & Roof UnderlayBRICKLAYING ..HOW TO .... INSTALL 2 HUGE RSJ STEEL BEAMS...EXTENSION BUILD PART 8Replacing Rotten Floor Joists