Easy DIY 80's Arcade Stick/Spinner/Trackball with Newly Manufactured Arcade 1Up components (vid#44)
In today's tutorial, I'll show you a very good way of making an arcade stick enclosure out of a wood-top monitor stand, and how to wire everything up. The controllers that you'll see in this episode are brought to you by my Youtube buddy, Glen Planamento, and you'll see that they have been manufactured to the highest standards. This Arcade controller has a Tron Flight stick, spinner and trackball and is PC and Playstation 3 compatible. During today's episode, you'll see how I overcame a number of hurdles to accomplish something I've never done before... and I'm thinking you can accomplish this just as I did. All it takes is a bit of motivation!
Glen's Youtube channel is found here: https://www.youtube.com/user/gplanamento
Thunderstick is the manufacturer of the components and they are found at Amazon at the following links:
Tron joystick: https://www.amazon.com/dp/B07X8DZ344/ref=cm_sw_em_r_mt_dp_U_agefEbEBF1QB9
Trackball:
https://www.amazon.com/dp/B07T1FQFRM/ref=cm_sw_em_r_mt_dp_U_peefEb162VHXQ
Spinner:
https://www.amazon.com/dp/B07P5WJ7BC?ref=myi_title_dp
12-in-1 encoder for spinner and trackball:
https://www.amazon.com/Arcade1Up-12-1-Interface-Board/dp/B07NKJ3SKH/ref=mp_s_a_1_2?keywords=12+in+1+spinner+board&qid=1581434836&sr=8-2
These controllers are made available on Amazon and sell out, but then are replenished, so be persistent in your attempt to obtain them. Keep going back!
The arcade buttons that I obtained were from this link: https://www.amazon.com/dp/B07VVHXQBN/ref=cm_sw_em_r_mt_dp_U_9mefEbTB7CC7K
Parts for the arcade stick enclosure:
1)Monitor stand
2) thin balsa wood
3) wood board
4) larger compressed woodfiber board
5) 1/2 inch screws
6) 3/8 inch screws
7) 5/8 inch screws
7) Woodpile Fun wood slabs (only needed if depth of monitor stand is insufficient)
8) Wood glue
Music in this episode:
––––––––––––––––––––––––––––––
Track: Play — Declan DP [Audio Library Release]
Music provided by Audio Library Plus
Watch: https://youtu.be/uEQ70lCZuec
Free Download / Stream: https://alplus.io/play
––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––
Track: Lovesight — DayFox [Audio Library Release]
Music provided by Audio Library Plus
Watch: https://youtu.be/PJdGPQigyMw
Free Download / Stream: https://alplus.io/lovesight
––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––
Flurowyde by BraveLion https://soundcloud.com/bravelion
Free Download / Stream: https://bit.ly/flurowyde
Music promoted by Audio Library https://youtu.be/cREsEygOmEk
––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––
Happy by MBB https://soundcloud.com/mbbofficial
Creative Commons — Attribution-ShareAlike 3.0 Unported — CC BY-SA 3.0
Free Download / Stream: https://bit.ly/Happy-MBB
Music promoted by Audio Library https://youtu.be/g6swHZbWtRc
––––––––––––––––––––––––––––––
Song: Markvard - Obsessed (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: https://youtu.be/4qkJ_nAG_w0
Song: Simon More - Meant To Be (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: https://youtu.be/mt0bqfV3pSI
#NoCopyrightMusic #VlogMusic #VlogNoCopyrightMusic
––––––––––––––––––––––––––––––
Running Free by INOSSI https://soundcloud.com/inossi
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
Free Download / Stream: https://bit.ly/_running-free
Music promoted by Audio Library https://youtu.be/QHGlv0K8_fE
––––––––––––––––––––––––––––––
Sunrise Over Los Angeles Synthwave and Underground Revolution were provided by: TechnoAxe
http://www.reverbnation.com/teknoaxe
Special thanks to Emforay for the intro song and a few of the shorter songs found in this video. You're awesome!
Special thanks to DJ Kestutis for providing the outro song, Reborn:
License: http://goo.gl/ZSoZf
Видео Easy DIY 80's Arcade Stick/Spinner/Trackball with Newly Manufactured Arcade 1Up components (vid#44) канала Wired-Up Retro
Glen's Youtube channel is found here: https://www.youtube.com/user/gplanamento
Thunderstick is the manufacturer of the components and they are found at Amazon at the following links:
Tron joystick: https://www.amazon.com/dp/B07X8DZ344/ref=cm_sw_em_r_mt_dp_U_agefEbEBF1QB9
Trackball:
https://www.amazon.com/dp/B07T1FQFRM/ref=cm_sw_em_r_mt_dp_U_peefEb162VHXQ
Spinner:
https://www.amazon.com/dp/B07P5WJ7BC?ref=myi_title_dp
12-in-1 encoder for spinner and trackball:
https://www.amazon.com/Arcade1Up-12-1-Interface-Board/dp/B07NKJ3SKH/ref=mp_s_a_1_2?keywords=12+in+1+spinner+board&qid=1581434836&sr=8-2
These controllers are made available on Amazon and sell out, but then are replenished, so be persistent in your attempt to obtain them. Keep going back!
The arcade buttons that I obtained were from this link: https://www.amazon.com/dp/B07VVHXQBN/ref=cm_sw_em_r_mt_dp_U_9mefEbTB7CC7K
Parts for the arcade stick enclosure:
1)Monitor stand
2) thin balsa wood
3) wood board
4) larger compressed woodfiber board
5) 1/2 inch screws
6) 3/8 inch screws
7) 5/8 inch screws
7) Woodpile Fun wood slabs (only needed if depth of monitor stand is insufficient)
8) Wood glue
Music in this episode:
––––––––––––––––––––––––––––––
Track: Play — Declan DP [Audio Library Release]
Music provided by Audio Library Plus
Watch: https://youtu.be/uEQ70lCZuec
Free Download / Stream: https://alplus.io/play
––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––
Track: Lovesight — DayFox [Audio Library Release]
Music provided by Audio Library Plus
Watch: https://youtu.be/PJdGPQigyMw
Free Download / Stream: https://alplus.io/lovesight
––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––
Flurowyde by BraveLion https://soundcloud.com/bravelion
Free Download / Stream: https://bit.ly/flurowyde
Music promoted by Audio Library https://youtu.be/cREsEygOmEk
––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––
Happy by MBB https://soundcloud.com/mbbofficial
Creative Commons — Attribution-ShareAlike 3.0 Unported — CC BY-SA 3.0
Free Download / Stream: https://bit.ly/Happy-MBB
Music promoted by Audio Library https://youtu.be/g6swHZbWtRc
––––––––––––––––––––––––––––––
Song: Markvard - Obsessed (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: https://youtu.be/4qkJ_nAG_w0
Song: Simon More - Meant To Be (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: https://youtu.be/mt0bqfV3pSI
#NoCopyrightMusic #VlogMusic #VlogNoCopyrightMusic
––––––––––––––––––––––––––––––
Running Free by INOSSI https://soundcloud.com/inossi
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
Free Download / Stream: https://bit.ly/_running-free
Music promoted by Audio Library https://youtu.be/QHGlv0K8_fE
––––––––––––––––––––––––––––––
Sunrise Over Los Angeles Synthwave and Underground Revolution were provided by: TechnoAxe
http://www.reverbnation.com/teknoaxe
Special thanks to Emforay for the intro song and a few of the shorter songs found in this video. You're awesome!
Special thanks to DJ Kestutis for providing the outro song, Reborn:
License: http://goo.gl/ZSoZf
Видео Easy DIY 80's Arcade Stick/Spinner/Trackball with Newly Manufactured Arcade 1Up components (vid#44) канала Wired-Up Retro
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![GRS USB only Arcade Spinner - sneak peek](https://i.ytimg.com/vi/aRCnTmsAckA/default.jpg)
![Atari Ultimate Dual Arcade Fight Stick with Trackball - Set up tips with Virtualman Pi4 Image.](https://i.ytimg.com/vi/GeUlgQBRX0U/default.jpg)
![How to make a DIY Smart Mirror](https://i.ytimg.com/vi/DjPGoGmO5VY/default.jpg)
![Ultimarc Product Tutorials - U-Trak Trackball](https://i.ytimg.com/vi/6mujFmXJQ_0/default.jpg)
![This Wireless Arcade Stick Is Amazing! Switch, PC, Android, Raspberry Pi](https://i.ytimg.com/vi/_LLgjQia0tk/default.jpg)
![X-Arcade Tankstick Spinner Mod](https://i.ytimg.com/vi/mFIlM3Oqv_U/default.jpg)
![Star Wars Arcade1Up Mod: Control Panel Upgrades, LED Buttons, and Analog Throttle Review -Battle Pod](https://i.ytimg.com/vi/QxkDCoEBrZE/default.jpg)
![Building Atari Paddles for Your Atari 2600 and Commodore Computers](https://i.ytimg.com/vi/cxAYaf03Pc8/default.jpg)
![DIY Arcade Midi Controller](https://i.ytimg.com/vi/-KDd_YY7fTI/default.jpg)
![MiSTer FPGA - How to build & configure, demo, cost, and pros/cons](https://i.ytimg.com/vi/-IP0k3GatHE/default.jpg)
![Build your own Eaton Fuller Shifter for ATS & ETS with CST Gaming](https://i.ytimg.com/vi/NybYkngg0K8/default.jpg)
![Arcade1Up Star Wars Pinball - It's HERE!](https://i.ytimg.com/vi/JigRU07O8hI/default.jpg)
![Big Problems! Arcade1up Legacy Edition Midway Classic Arcade 12 in 1 Review (2021)](https://i.ytimg.com/vi/efmJ9QYuaGY/default.jpg)
![DIY Arcade Stick: Easy, High Quality & Affordable](https://i.ytimg.com/vi/L9NYNwv0HYk/default.jpg)
![How to Build Sim Racing Cockpit Works with Any Game/Console](https://i.ytimg.com/vi/8CzITBWKP8s/default.jpg)
![Arcade1up NEW - PARTY-CADE - 8 in 1 Review - Asteroids, Tempest, Gravitar](https://i.ytimg.com/vi/u_NqC2oq78Q/default.jpg)
![Atari Arcade Fight Stick Unlocked Gaming Potential - 10,000+ Games](https://i.ytimg.com/vi/jD9TVMeHooA/default.jpg)
![What The Heck Is The Polycade?! Arcade Gaming Project With Ties To Atari - Crowdfunding Craziness!](https://i.ytimg.com/vi/2y5BAFwJ4ss/default.jpg)
![Configure a USB Spinner in RetroPie on Your Raspberry Pi](https://i.ytimg.com/vi/oOQeUbZudUA/default.jpg)
![Light-gun on a Raspberry Pi 4 Model B+Mayflash Dolphin Bar(for Wii Remote) MAME Setup and Game-play!](https://i.ytimg.com/vi/WfiVTDwSwoE/default.jpg)