Replacing the Pinion Seals on the LMTV
After we installed the 3.07 gears we developed a leak on both pinion seals. Bryce figured it was a bad batch of seals so he sent me a replacement set for free. They are normally $60 a piece, and in the end it turned out to be a bad batch of RTV silicone that caused the issue. Removal of the seals destroys them, so I paid him for the seals anyway. It's hard to find honest folks in the world today, so you take care of the ones you find.
I used right stuff gasket maker that will harden in an hour, so I cleaned the crap out of everything and left the oil out of it until the next day just to be sure.
so far 2300 miles and no leaks, so I'm fairly happy with the outcome.
If you like our videos,
Subscribe to our channel: https://www.youtube.com/brokeoverland
For more information about the build, and contact information visit the web site:
https://brokeoverland.com
Visit our Facebook page at: which is hardly ever updated… :)
https://fb.me/BrokeOverland
If Instagram is your jam, the wife posts some pictures every so often.
@Crustyonwheels
Видео Replacing the Pinion Seals on the LMTV канала Broke OverLand
I used right stuff gasket maker that will harden in an hour, so I cleaned the crap out of everything and left the oil out of it until the next day just to be sure.
so far 2300 miles and no leaks, so I'm fairly happy with the outcome.
If you like our videos,
Subscribe to our channel: https://www.youtube.com/brokeoverland
For more information about the build, and contact information visit the web site:
https://brokeoverland.com
Visit our Facebook page at: which is hardly ever updated… :)
https://fb.me/BrokeOverland
If Instagram is your jam, the wife posts some pictures every so often.
@Crustyonwheels
Видео Replacing the Pinion Seals on the LMTV канала Broke OverLand
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Balancing the Massive tires on an LMTV](https://i.ytimg.com/vi/SfZCwdgwGO8/default.jpg)
![Replacing a Hub Cover on the LMTV](https://i.ytimg.com/vi/nMUBRCxMvHg/default.jpg)
![Adding Power Windows, Locks and Mirrors to the LMTV](https://i.ytimg.com/vi/HrHEYENKGZw/default.jpg)
![We got a box... and drove it 3,000 miles. W.C.G.W.](https://i.ytimg.com/vi/MnOASEKpZec/default.jpg)
![LMTV Winch Roller repair and pulling parts](https://i.ytimg.com/vi/GqR68051QxU/default.jpg)
![LMTV - 3.07 Gears first impressions](https://i.ytimg.com/vi/5dOUepQRl7Y/default.jpg)
![LMTV LED Headlights](https://i.ytimg.com/vi/T-6GUyEMA24/default.jpg)
![First 2400 Mile Road Trip in the LMTV](https://i.ytimg.com/vi/lszy1pb4YLc/default.jpg)
![Cab air bag replacement LMTV MTV](https://i.ytimg.com/vi/gSv5IaxIM-I/default.jpg)
![Installing New drive shafts on the LMTV](https://i.ytimg.com/vi/qhsfRBRH9KQ/default.jpg)
![Dead Starter on the LMTV](https://i.ytimg.com/vi/FZ_lWQRkc9U/default.jpg)
![Installing an Air-conditioning condenser in the LMTV](https://i.ytimg.com/vi/WC9nV55wuCE/default.jpg)
![Transit diff part 1 remove only](https://i.ytimg.com/vi/Im7pq3_wpvE/default.jpg)
![Seafoam--can't believe what it did to my engine!!](https://i.ytimg.com/vi/agAWXnT4-EQ/default.jpg)
![Installing a new Hydraulic cab tilt pump](https://i.ytimg.com/vi/8RzjXwzHqDE/default.jpg)
![Increasing the Tire Pressure on the LMTV](https://i.ytimg.com/vi/_CF1_R3TZDU/default.jpg)
![Fixing Pinion Angle Problems on your Lifted Truck](https://i.ytimg.com/vi/wkfndHDiH1M/default.jpg)
![Third Member Assembly](https://i.ytimg.com/vi/LjY33r0HVAc/default.jpg)
![Please learn from my LMTV conversion mistakes](https://i.ytimg.com/vi/bUFDHyFixzo/default.jpg)
![There is no end to this LMTV roof rack project.](https://i.ytimg.com/vi/WPyur9jYh9A/default.jpg)