Home on anything with any tool automatically on an Ender 3 pro
In this video I show an alternative homing method which is a bit similar to the BLTouch. This method uses a modified quick tool change base and its possible to home on any surface of any thickness with any tool with just an ordinary homing switch.
I start the video with that I think I have something better than the BLTouch. I haven't even seen one in real life, let alone used it, so there's no way for me to be sure about this. Based on what I have seen I think that this method works better for my situation, but please leave a message if you think differently :)
Videos and posts I have watched/read to gain knowledge about this subject are:
Setting the Z offset: https://youtu.be/Q5M7DvdMcew
Flashing the bootloader: https://www.instructables.com/id/Flashing-a-Bootloader-to-the-CR-10/
Installing the firmware: https://youtu.be/fIl5X2ffdyo and https://youtu.be/7J7NYnxL5vA
The firmware I have used: http://marlinfw.org/meta/download/
The lines of code I have adjusted:
#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. // set to true if using the normally open connection
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. // set to true if using the normally open connection
#define Z_SAFE_HOMING // uncomment
#define FIX_MOUNTED_PROBE // uncomment
Music from Epidemic sound. Want a subscription yourself? Please use this referral link to support me: https://www.epidemicsound.com/referral/jcsbjz/
Please consider buying me a coffee if you liked it or helped you :) http://ko-fi.com/properprinting/ I place photos of the projects I am working on here too at random to get you excited with what has to come!
The link to my website: https://properprinting.pro/
You can find the parts I have used in this video together with my other designs on my website: https://properprinting.pro/product-category/3d-print-files/
Software used for making this video:
- Mechanical design: Fusion 360 https://www.autodesk.com/products/fusion-360/overview/
- Illustrations: Inkscape https://inkscape.org/
- Laser engraving: Lightburn https://lightburnsoftware.com/
- Slicer: Simplify3D https://www.simplify3d.com/
- Video editing: HitFilm Express https://fxhome.com/express/
- Screen recording: Captura https://github.com/MathewSachin/Captura/
- Audio recording: Audacity https://www.audacityteam.org/
- Photo enhancing: https://rawtherapee.com/
If you have any questions or suggestions, feel free to leave a comment!
Видео Home on anything with any tool automatically on an Ender 3 pro канала Proper Printing
I start the video with that I think I have something better than the BLTouch. I haven't even seen one in real life, let alone used it, so there's no way for me to be sure about this. Based on what I have seen I think that this method works better for my situation, but please leave a message if you think differently :)
Videos and posts I have watched/read to gain knowledge about this subject are:
Setting the Z offset: https://youtu.be/Q5M7DvdMcew
Flashing the bootloader: https://www.instructables.com/id/Flashing-a-Bootloader-to-the-CR-10/
Installing the firmware: https://youtu.be/fIl5X2ffdyo and https://youtu.be/7J7NYnxL5vA
The firmware I have used: http://marlinfw.org/meta/download/
The lines of code I have adjusted:
#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. // set to true if using the normally open connection
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. // set to true if using the normally open connection
#define Z_SAFE_HOMING // uncomment
#define FIX_MOUNTED_PROBE // uncomment
Music from Epidemic sound. Want a subscription yourself? Please use this referral link to support me: https://www.epidemicsound.com/referral/jcsbjz/
Please consider buying me a coffee if you liked it or helped you :) http://ko-fi.com/properprinting/ I place photos of the projects I am working on here too at random to get you excited with what has to come!
The link to my website: https://properprinting.pro/
You can find the parts I have used in this video together with my other designs on my website: https://properprinting.pro/product-category/3d-print-files/
Software used for making this video:
- Mechanical design: Fusion 360 https://www.autodesk.com/products/fusion-360/overview/
- Illustrations: Inkscape https://inkscape.org/
- Laser engraving: Lightburn https://lightburnsoftware.com/
- Slicer: Simplify3D https://www.simplify3d.com/
- Video editing: HitFilm Express https://fxhome.com/express/
- Screen recording: Captura https://github.com/MathewSachin/Captura/
- Audio recording: Audacity https://www.audacityteam.org/
- Photo enhancing: https://rawtherapee.com/
If you have any questions or suggestions, feel free to leave a comment!
Видео Home on anything with any tool automatically on an Ender 3 pro канала Proper Printing
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
DIY PCB on Creality printer and nailed it!?The cheapest build surface ever! Will it work??A 3D printed single piece guitar neck?! ft. CR-30 belt printerHow I made my own water cooling blocks and a added water cooled DyzeDesign pro hotend.What I printed with my new 3D printerEnder 3 pro power supply mod and some safety tipsSwap to laser engraving easily and align it properly on Creality CR-10How to STOP Elephant's Foot on your 3D PrintsProperly controlling an Ender 3 pro with a LattePanda print serverSwappable hot end for Creality CR-10Marlin: Automatic print bed calibration (+ Ender-3: FreeABL) (3D printing)Unified Bed Leveling Overview with Jyers Firmware on the Ender 3 v2MUST HAVE and SIMPLEST mod for Ender-3 S1! Contest worthy?High Temp 3D Printing FOR NASA with Vision MinerMoving portal printer torture test, how does it perform?Experimental dual extrusion system which actually works! My submission to the Creality contest.Printing (carbon fiber) Nylon on an Ender 3Creality Ender 3 Pro - 3D Printer - Upgrades & FixesDuet 2 Maestro & Reprap firmware on SK-GO: Guide for a Marlin user