Machining & Boring BIG Steel Tubes | Large Lathe Work

This video is a job from our machining workshop to machine and bore the ends of 3 large steel tubes for a welding rotator drive plate. The steel tubes are approximately 3 metres (10’ feet) long and 325mm (13” inches) in diameter so we need to set them up in our 5 metre LZMT lathe machine. We first set up the tubes using our Tailstock chock and machine a band for the steady rest. Once the steady rest is setup we then remove material from the ID of tube end to suit the drive plate. We are using our Monkula Anti-vibration boring bar and will also be machining and facing down the tube ends to customers spec.

In this video we are using:
- LZMT CW6280D Lathe
- Monkula M6D-50-400-40 Anti-vibration bar

Join our channel:
We upload new videos every Friday at 5pm AEST! If you want to see more of our videos click LIKE & SUBSCRIBE! You can subscribe to our channel here: https://bit.ly/ceesubscribe

To see more follow us on online here:
Instagram https://instagram.com/cutting_edge_engineering
Facebook https://www.facebook.com/cuttingedgeengineeringaustralia/

Official CEE Merch shop: https://www.ceeshop.com.au

About Us:
Our channel is all about showing you real life machining work from our workshop on the Gold Coast Australia. We specialize in manual machining, hydraulic repairs and heavy fabrication for the earth moving, mining and civil construction industries. So if you're a machinist that wants to see some big gear in action be sure to subscribe to our channel right now. We upload new videos every week that show lathe machining, milling, welding and all the good stuff that comes from a machining workshop. If that sounds like something that you would enjoy seeing, then make sure to join us by subscribing!

Music: https://www.epidemicsound.com/referral/rccrvr/
Song: Any Sign by Hunting for Sunsets

#australianmachinist #machineshop #machinist

Видео Machining & Boring BIG Steel Tubes | Large Lathe Work канала Cutting Edge Engineering Australia