HOW TO REPLACE A FOUNTAIN WATER PUMP | SUBMERSIBLE PUMP

Replaced a concrete fountain water pump that was sealed in the fountain. Cut out a hole to be able to get to it and rerouted the electrical wire.
TOOLS and PARTS USED IN THIS VIDEO;
Link for the Water Pump: https://amzn.to/2YA0Vty
Link for the Waterproof Connector: https://amzn.to/2Yy2vw6
Angle Grinder: https://amzn.to/3cYukX4
Cutting Wheel: https://amzn.to/3lb4u4K
Carbide Masonry Drill Bit, 3/8-Inch: https://amzn.to/3s9VOQz
DEWALT 20V MAX Cordless Drill / Driver Kit, Compact, 1/2-Inch: https://amzn.to/2JYCoga
Full Face Grinding Shield, Clear: https://amzn.to/30XkH62
Link for the SikaBond Construction Adhesive, Cartridge, Gray: https://amzn.to/31MxCsj
Tape Measure, 25-Foot: https://amzn.to/3cW9szA
If you need to level the base these shims would help: Wobble Wedges Flexible Plastic Shims, 30 Pack - Multi-Purpose Wedges for Home Improvement and Workplace - The Ideal Table Shims, Toilet Shims: https://amzn.to/3vMKScN
“As an Amazon Associate I earn from qualifying purchases at no extra cost to you.”
Video of the Waterproof connector: https://youtu.be/0hNVuWMKtmk
WATER PUMP: This compact 300-GPH pump features 1/4" MNPT discharge, 7' shut-off head capability, screened inlet, and 6' power cord. Pumps are not recommended for fuel oil transfer, aquariums, and swimming pools.
IMPEDANCE PROTECTION: This pump is Impedance protected and it has maximum lift to 7-ft. Bottom inlet has snap off screen for easy cleaning. It has 1/4" MNPT outlet, with 90-Degree elbow accessory, and accepts 1/2" I.D. tubing.
SUBMERSIBLE PUMP: Small, submersible, epoxy-encapsulated pump is for commercial, industrial, and home use. Applications include statuary fountains, water displays, air conditioners, machine tools, and many other applications where liquid must be transferred or re-circulated.
EPOXU ENCAPSULATED PUMP: It is 1/40 HP epoxy encapsulated and has direct drive motor. It is Nitrile shaft sealed and polyester housing. Snap off screen covers intake. It is UL listed.
DIRECT DRIVE MOTOR PUMP DIMENSION: This small submersible pump is of opening size 4.8 x 2.8 x 4.2 inches. It is for submersible use only and designed for continuous duty.

【Connector】3 wire (3-pole) connector, Cable Size: Ø 5-10mm, available for 2 or 3-pin cables, the connectors include " live wire" "neutral wire" "earth wire"
【Strong waterproof】Rubber ring + clamping nut to provide the perfect waterproof, waterproof rating up to IP68, can be immersed in water depth of not more than 2m
【High-quality materials】The connector made of PA66 material, high temperature resistance, hardness, rated voltage: ≤ 400v, rated current: ≤13A, Temperature: -40 - 95 ℃
【Easy to install】Small volume,just a screwdriver, so that the cable connector installed in any place where it needs
【Wide Usability】Suitable for fast connection to the outdoor lighting, and external wiring, safe DIY tool, we can use it to repair and extend power cables.
These pumps are described in so many ways:
submersible water fountain pump
submersible water pump
statuary fountain water pump
Garden fountain water pump
Tile Cutter submersible water pump

See HOME IMPROVEMENT Proejcts Playlist for more;
https://www.youtube.com/watch?v=7BzMW0DT6yc&list=PLKE7F0aRK-jnqMH0qQ0iME0_soMHS86V5

Видео HOW TO REPLACE A FOUNTAIN WATER PUMP | SUBMERSIBLE PUMP канала John C RV