How to Install a shelf in the cupboard? New place for the shelf
Shelf support can be purchased here: http://ali.pub/y5f3v
Cashback 7% Aliexpress: https://cashback.epn.bz/?inviter=4087b
Partnership program AliExpress: https://epn.bz/joinus/?inviter=4087b
The cupboard has a special shelf, which can be removed and frees up space for the TV. And now it lies idle. Since space on open shelves and a lot of useful space is lost, it was decided to make an additional shelf, which just there. You will need:
1) Shelf support 5x17 mm - 4 pcs.
2) 5 mm drill bit with limiter. I made it from a tape. This can be viewed here: https://youtu.be/joYnSz_FXkw?list=PLpyjsPuTm2ayIRsl3isyHLQ0J1mePcoxI
3) screwdriver.
4) Ruler and pencil
5) Building level.
I figured at what height will the regiment. This can put the items that are expected to be at or below it. Mark the space under the opening. The height between the centers of the holes to the bottom shelf has turned 220 mm. Distance from the back wall to the centers of the openings 40 and 190 mm. (Dimensions taken from the other shelves). I check the horizontal level of the building. To sawdust was then easily removed, I took a sheet of A4 paper. I bent 3 times, so that the paper took the desired shape, and then glued shut. All chips after drilling remained on paper. Drill the holes. Inserted shelf holders and put them on the shelf. Done!
I share all that I am doing own hands at home. The channel you will see homemade, crafts, repair of equipment, experiments, tests, unpacking and review products from China (Aliexpress), various household manual. I also will share my inventions and interesting ideas to improve and simplify the life (life hacking).
Movies shown on that channel, show the personal experience and are entertaining. For all that you do, you answer yourself. Observe caution and safety rules.
///////////////// SUBSCRIBE \\\\\\\\\\\\\\\\\
********** http://goo.gl/Tp0aX9 ***********
////////////////////////////////////////////////
////////////// MY CHANNELS \\\\\\\\\\\\\\\
https://goo.gl/LWSVj3 - Live Laugh
https://goo.gl/GLJ2hf - Alexander Dikovinniy
https://goo.gl/IlJ8ZE - Dikovinniy World
https://goo.gl/2mqicP - Animals and Fun
**************** PLAYLISTS ****************
goo.gl/lTXljH - Instuctions
goo.gl/Jy8Xjd - Parcels, Reviews, Tests
goo.gl/RtQfXg - Water Device
goo.gl/u4Snhv - Interesting Ideas
goo.gl/LzpXou - Repairs
goo.gl/lzM9Yg - Toyota Camry Gracia
goo.gl/zOHwUB - The use of plastic PET bottles DIY
**********************************************
Music:
Stryv - Surge (Original Mix)
https://soundcloud.com/stryvmusic/stryv-surge-original-mix-free
Creative Commons Licence
http://creativecommons.org/licenses/by/3.0/
/////////////////= HELP CHANNEL =/////////////////
PayPal: Dikovinniy@yandex.ru
Webmoney (WMZ-dollars): Z315805724463
Видео How to Install a shelf in the cupboard? New place for the shelf канала Dial
Cashback 7% Aliexpress: https://cashback.epn.bz/?inviter=4087b
Partnership program AliExpress: https://epn.bz/joinus/?inviter=4087b
The cupboard has a special shelf, which can be removed and frees up space for the TV. And now it lies idle. Since space on open shelves and a lot of useful space is lost, it was decided to make an additional shelf, which just there. You will need:
1) Shelf support 5x17 mm - 4 pcs.
2) 5 mm drill bit with limiter. I made it from a tape. This can be viewed here: https://youtu.be/joYnSz_FXkw?list=PLpyjsPuTm2ayIRsl3isyHLQ0J1mePcoxI
3) screwdriver.
4) Ruler and pencil
5) Building level.
I figured at what height will the regiment. This can put the items that are expected to be at or below it. Mark the space under the opening. The height between the centers of the holes to the bottom shelf has turned 220 mm. Distance from the back wall to the centers of the openings 40 and 190 mm. (Dimensions taken from the other shelves). I check the horizontal level of the building. To sawdust was then easily removed, I took a sheet of A4 paper. I bent 3 times, so that the paper took the desired shape, and then glued shut. All chips after drilling remained on paper. Drill the holes. Inserted shelf holders and put them on the shelf. Done!
I share all that I am doing own hands at home. The channel you will see homemade, crafts, repair of equipment, experiments, tests, unpacking and review products from China (Aliexpress), various household manual. I also will share my inventions and interesting ideas to improve and simplify the life (life hacking).
Movies shown on that channel, show the personal experience and are entertaining. For all that you do, you answer yourself. Observe caution and safety rules.
///////////////// SUBSCRIBE \\\\\\\\\\\\\\\\\
********** http://goo.gl/Tp0aX9 ***********
////////////////////////////////////////////////
////////////// MY CHANNELS \\\\\\\\\\\\\\\
https://goo.gl/LWSVj3 - Live Laugh
https://goo.gl/GLJ2hf - Alexander Dikovinniy
https://goo.gl/IlJ8ZE - Dikovinniy World
https://goo.gl/2mqicP - Animals and Fun
**************** PLAYLISTS ****************
goo.gl/lTXljH - Instuctions
goo.gl/Jy8Xjd - Parcels, Reviews, Tests
goo.gl/RtQfXg - Water Device
goo.gl/u4Snhv - Interesting Ideas
goo.gl/LzpXou - Repairs
goo.gl/lzM9Yg - Toyota Camry Gracia
goo.gl/zOHwUB - The use of plastic PET bottles DIY
**********************************************
Music:
Stryv - Surge (Original Mix)
https://soundcloud.com/stryvmusic/stryv-surge-original-mix-free
Creative Commons Licence
http://creativecommons.org/licenses/by/3.0/
/////////////////= HELP CHANNEL =/////////////////
PayPal: Dikovinniy@yandex.ru
Webmoney (WMZ-dollars): Z315805724463
Видео How to Install a shelf in the cupboard? New place for the shelf канала Dial
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Organizer for the tools DIY. Holder for the tool from the clamp on the siphonSUPER LED Rotary Lamp on the remote control DIY. How to make a swivel lamp. HomemadeDIY Lid handle on 3D-printer. 3D modeling in Fusion 360From single to double eaves. How to hang a ceiling cornice DIYControl LED ribbon. Parcels AliExpress (15)How to put the old board. Storage boardsBike Mount for the lantern. Holder lantern3D Mouse Trap. How to resume printing on a 3D printerTrailer Channel Dial. Short fragments from various videosGarbage bag holder. Parcels Aliexpress (16)The table for the roof. How to make a shelf for the roofDevice for winding wires. DIY deviceChristmas tree DIYHow to make the water flow outside. Sewerage own handsHow to insulate a window. If blowing out the windowTo avoid fell out crates. DIY lifehackArduino Uno Set. Parcels AliExpress (14)Filling donors CISS. Filling of Continuous Ink Supply System DIYReplacing bulb in the headlamp. Toyota Camry GraciaHow to make a loop of nails. Handmade hinges DIYBicycle computer from China. How to install. Parcel AliExpress (39)