FULL Rear Mount Turbo G35 / 350Z Walkaround & Review (+G37, 370Z etc.)
REUPLOAD FROM MY OTHER CHANNEL, OG DESCRIPTION:
This is a detailed walkaround of a rear mount kit I made for my G35 Sedan, as well as my other mods. This also applies to 350Z, 370Z, and select G, M, Q, EX and FX series. I originally put this all together because I do my own work and had most of this stuff lying around the garage, I personally only spend around $800.
Follow me @dennybalance
FULL DETAILS:
Hot side:
Test pipes $80-250
Ebay T3 flange $40
Ebay HX40 ~$150 (look for 99% rated sellers on ebay)
2.5 inch piping ~$20-50
Filter $20
If you have a cat back I recommend selling it, you'll need 2.5 pipe back to the turbo
Cold side (DE):
eBay 2.5 inch intercooler kit $165
eBay 2.5 inch (additional) intercooler piping $100
Autozone / Spectre 4 inch MAF housing $40 or upgraded MAF
3 inch intake / IC piping $0-200 depending on what you choose / already have
You might need extra couplers, clamps etc. I get em all on Amazon
Cold side (HR / VHR):
2 out 1 in Intercooler $270
eBay 2.5 inch intercooler piping $100 (x2)
Intakes $0 - 150+
Once again you might need extra couplers etc.
Oil system:
I recommend to get an oil pan spacer ($110), I personally drilled the upper oil pan and used a 10AN no weld bung
1/8 NPT to 1/8 BSPT adapter $9
1/8 NPT oil pressure sensor tee block $10
Vibrant 1/8 NPT to 4AN adapter $8
EVIL ENERGY 16ft 4AN braided oil line kit $67
Amazon T3 4AN oil feed .35" restrictor (I drilled to about .70") $10
Amazon T3 10AN oil drain $10
EVIL ENERGY 16ft 10AN oil line kit $82
(you can use regular oil line it’s cheaper)
Aeroquip 3/8 NPT to 10AN adapter (2) $20
Amazon Amarine made 3.7 GPM oil scavenge pump $70
(You can pay more for a quieter one)
Kinugawa 10AN no weld oil drain bung $14
eBay catch can + autozone oil lines ~$45
Or avoid all this and get a Comp lol
Supporting mods:
Amazon 255 LPH fuel pump $30 (Or just get a real one)
eBay Denso 850cc refurbished injectors (935cc @52 psi) $160
NGK 6619 one heat range colder spark plugs (LFR6AIX-11) $40
Heat wrap materials, amazon $35
Gauges are technically optional but you need a boost gauge and therefore a gauge pod ~$40+
eBay manual boost controller $30
Set aside about $1,700 for a DE, $1,900 - 2,100 for an HR / VHR
Don't forget labor and tuning if you don't do it yourself
Cut the trunk sedan guys it was worth it
You're welcome
Видео FULL Rear Mount Turbo G35 / 350Z Walkaround & Review (+G37, 370Z etc.) канала 2200Denny
This is a detailed walkaround of a rear mount kit I made for my G35 Sedan, as well as my other mods. This also applies to 350Z, 370Z, and select G, M, Q, EX and FX series. I originally put this all together because I do my own work and had most of this stuff lying around the garage, I personally only spend around $800.
Follow me @dennybalance
FULL DETAILS:
Hot side:
Test pipes $80-250
Ebay T3 flange $40
Ebay HX40 ~$150 (look for 99% rated sellers on ebay)
2.5 inch piping ~$20-50
Filter $20
If you have a cat back I recommend selling it, you'll need 2.5 pipe back to the turbo
Cold side (DE):
eBay 2.5 inch intercooler kit $165
eBay 2.5 inch (additional) intercooler piping $100
Autozone / Spectre 4 inch MAF housing $40 or upgraded MAF
3 inch intake / IC piping $0-200 depending on what you choose / already have
You might need extra couplers, clamps etc. I get em all on Amazon
Cold side (HR / VHR):
2 out 1 in Intercooler $270
eBay 2.5 inch intercooler piping $100 (x2)
Intakes $0 - 150+
Once again you might need extra couplers etc.
Oil system:
I recommend to get an oil pan spacer ($110), I personally drilled the upper oil pan and used a 10AN no weld bung
1/8 NPT to 1/8 BSPT adapter $9
1/8 NPT oil pressure sensor tee block $10
Vibrant 1/8 NPT to 4AN adapter $8
EVIL ENERGY 16ft 4AN braided oil line kit $67
Amazon T3 4AN oil feed .35" restrictor (I drilled to about .70") $10
Amazon T3 10AN oil drain $10
EVIL ENERGY 16ft 10AN oil line kit $82
(you can use regular oil line it’s cheaper)
Aeroquip 3/8 NPT to 10AN adapter (2) $20
Amazon Amarine made 3.7 GPM oil scavenge pump $70
(You can pay more for a quieter one)
Kinugawa 10AN no weld oil drain bung $14
eBay catch can + autozone oil lines ~$45
Or avoid all this and get a Comp lol
Supporting mods:
Amazon 255 LPH fuel pump $30 (Or just get a real one)
eBay Denso 850cc refurbished injectors (935cc @52 psi) $160
NGK 6619 one heat range colder spark plugs (LFR6AIX-11) $40
Heat wrap materials, amazon $35
Gauges are technically optional but you need a boost gauge and therefore a gauge pod ~$40+
eBay manual boost controller $30
Set aside about $1,700 for a DE, $1,900 - 2,100 for an HR / VHR
Don't forget labor and tuning if you don't do it yourself
Cut the trunk sedan guys it was worth it
You're welcome
Видео FULL Rear Mount Turbo G35 / 350Z Walkaround & Review (+G37, 370Z etc.) канала 2200Denny
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Pulled the Blown Engine out of my Turbo G35Accidentally ruined my turbo G35 :(Dropped the New Engine into the Turbo G35!G35 Revup to DE swap First start and drive POVRear Mount Turbo G35 Flybys and diagnosingG35 DE Budget Mid Mount Turbo Kit Part 1G35 DE Mid Mount Turbo Part 2 - Mostly FinishedMaking the Rear Mount Turbo G35 QuieterTurbo G35 Sedan gets LED Spyder HeadlightsTrying to Daily My Turbo G35 SedanULTRA Budget Mid Mount Single Turbo Kit for G35 Part 1New Daily While I Fix My G35ULTRA Budget Mid Mount Turbo Kit for G35 Part 2: Crossover DoneFinally Got a Replacement Engine for my Turbo G35ULTRA Budget Mid Mount Turbo Kit G35 Part 3: Oil SystemNew Wheels for Rear Mount Turbo G35 SedanFixed boost leak | Rear Mount Turbo g35's LAST DRIVERear Mount Turbo Cam POV on the G35! No BOV All the Noise!Turbo G35 gets new spark plugs & coils (still misfiring)Fixing exhaust leaks on the rear mount turbo G35