Honda CB400f Restoration Complete. Start and Walk Around
Some of you have seen clips of my 1976 CB400f in the past. Over the last couple of years I've been slowly restoring it, as a bike to ride and have fun with. The bike hasn't been run in around 3 years, and this weekend I finally got it back together and running again! Here's a quick unedited walk-around video!
Things I've done since pulling the bike apart include:
New, NOS complete seat.
New Handlebars
New UK spec hand controls (not a straightforward wiring swap)
New Honda hand grips
New mirrors
New Akront style aluminum rims, and new spokes laced to freshly polished CB400f hubs.
Avon Roadrider tires
Drilled front rotor
Suzuki Burgman 400 Front Master cylinder, and custom stainless braided front brake line.
Polished front fork lowers and rebuilt forks with new seals and dust boots.
Reproduction stock CB400f exhaust headers
NOS chrome exhaust flanges
Custom silencer setup (sounds really amazing in person!)
Installed tapered roller steering head bearings
Painted upper and lower triple clamp as well as footpegs, kickstand and center stand, and numerous other brackets.
Stripped paint off side covers and polished them. (Took 22 hours of labor for me to polish them!)
New battery
Went through and did a tune up, including balancing the carbs, setting the ignition timing, setting valve clearances, adjusting cam chain tension, etc.
I still have a few little cosmetic things I want to do to the bike, however for the most part its ready to go! Rode it last night for the first time since 2013!
Видео Honda CB400f Restoration Complete. Start and Walk Around канала Mtrhd0024
Things I've done since pulling the bike apart include:
New, NOS complete seat.
New Handlebars
New UK spec hand controls (not a straightforward wiring swap)
New Honda hand grips
New mirrors
New Akront style aluminum rims, and new spokes laced to freshly polished CB400f hubs.
Avon Roadrider tires
Drilled front rotor
Suzuki Burgman 400 Front Master cylinder, and custom stainless braided front brake line.
Polished front fork lowers and rebuilt forks with new seals and dust boots.
Reproduction stock CB400f exhaust headers
NOS chrome exhaust flanges
Custom silencer setup (sounds really amazing in person!)
Installed tapered roller steering head bearings
Painted upper and lower triple clamp as well as footpegs, kickstand and center stand, and numerous other brackets.
Stripped paint off side covers and polished them. (Took 22 hours of labor for me to polish them!)
New battery
Went through and did a tune up, including balancing the carbs, setting the ignition timing, setting valve clearances, adjusting cam chain tension, etc.
I still have a few little cosmetic things I want to do to the bike, however for the most part its ready to go! Rode it last night for the first time since 2013!
Видео Honda CB400f Restoration Complete. Start and Walk Around канала Mtrhd0024
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Pre-Solo FlightAHRMA Historic Production Lightweight 2nd Place -Roebling Road 20172004 S2000 - TSCC AutocrossSugah Cain PlantationCB160 Project - I got it running!Honda Hawk GTRiding my 1976 Honda CB400FWoodlawn Aerial VideoLocal Twisties On The DRz400SMPeugeot 106- First startup after engine rebuild!Frankenslide 2014 Crash! BWW vs NissanDevils Whip (NC Hwy 80) Run!Tesla Model S Plaid 0-601990 Miata at the FIRM - SCIC TrackdayBarber Vintage Festival - Race 2 - Heavyweight Production CrashHistoric Production Heavyweight, 2nd Place, Barber Vintage Festival 2018Crazy FPV - Litchfield Beach From The Air!Lancair 360 Engine Run AttemptRiding one of Z50s around my house.Sony HandyCam HDR-CX110 Raw FootageHistoric Production Lightweight Win, Barber Vintage Fest 2018!