Home Decor Idea - DIY Night Lamp from PVC Pipe
Home Decor Idea - DIY Night Lamp from PVC Pipe
Hello dear viewers! I made a Night Lamp use PVC Pipe with my own hands.
This Night Lamp has a spectacular appearance, but it is easy to do it yourself!
But if you want to make this chandelier, you will definitely be able to do.
If you liked the video, please subscribe to my channel!👇👇👇👍
https://www.youtube.com/channel/UCKxKVfJpu5G0f5N4HwwexDg?sub_confirmation=1
Thanks!
Template link
https://drive.google.com/drive/folders/1V3f5nshjvisPuprDfLHoDbjWXf216Ihl?usp=sharing
All music from this video I found here
https://www.epidemicsound.com/referral/hiwaxn
00:00 Video started
00:03 Creating a template
00:12 Finally I found a good design
00:26 Draw Lines on the pipe using the template
00:53 Cut the pipe along the lines, use a jigsaw or hacksaw
01:08 Cut decorative elements from pipe pieces
02:07 Make a hole in three pieces so that you can bolt all the pieces together.
02:43 Sand thoroughly
02:56 Take the bulb holder, mark the location and make two holes
03:08 One of the holes for attaching the bulb holder and the other one for the electric wire
03:16 Cut a stick out of the board to measure 3cm width and 55cm height
03:30 Cut a 12-15 cm circle from the board
03:50 Sand the wooden parts carefully
04:08 Start assembling the lamp frame as shown in the video
04:44 Transfer the hole marks from the pipe to the frame and make holes on the frame
05:09 Make another hole for fastening to the frame.
05:22 You can cut at an angle as in the video.
05:33 If the bolts are long, cut to size so that they do not protrude from the nuts
06:05 Almost everything is ready, it remains to clean the parts with acetone solvent and start ...
06:19 I advise you to first make a primer
06:28 Next, paint over the inside of the pipe and parts that have the same color.
06:39 Next, the rest of the details, but first - close the inside with tape
06:56 After drying, start assembling
07:10 not caring to subscribe, like and leave your comment, this will help promote my channel
07:20 Template and helpful info
07:55 Thanks for watching, check out other videos on my channel. Best wishes for you 😘😘😘
Home Decor Idea - DIY Night Lamp from PVC Pipe
#NightLamp #PVC #Pipe #ArdoDiy
Видео Home Decor Idea - DIY Night Lamp from PVC Pipe канала ARDO DIY CRAFTS
Hello dear viewers! I made a Night Lamp use PVC Pipe with my own hands.
This Night Lamp has a spectacular appearance, but it is easy to do it yourself!
But if you want to make this chandelier, you will definitely be able to do.
If you liked the video, please subscribe to my channel!👇👇👇👍
https://www.youtube.com/channel/UCKxKVfJpu5G0f5N4HwwexDg?sub_confirmation=1
Thanks!
Template link
https://drive.google.com/drive/folders/1V3f5nshjvisPuprDfLHoDbjWXf216Ihl?usp=sharing
All music from this video I found here
https://www.epidemicsound.com/referral/hiwaxn
00:00 Video started
00:03 Creating a template
00:12 Finally I found a good design
00:26 Draw Lines on the pipe using the template
00:53 Cut the pipe along the lines, use a jigsaw or hacksaw
01:08 Cut decorative elements from pipe pieces
02:07 Make a hole in three pieces so that you can bolt all the pieces together.
02:43 Sand thoroughly
02:56 Take the bulb holder, mark the location and make two holes
03:08 One of the holes for attaching the bulb holder and the other one for the electric wire
03:16 Cut a stick out of the board to measure 3cm width and 55cm height
03:30 Cut a 12-15 cm circle from the board
03:50 Sand the wooden parts carefully
04:08 Start assembling the lamp frame as shown in the video
04:44 Transfer the hole marks from the pipe to the frame and make holes on the frame
05:09 Make another hole for fastening to the frame.
05:22 You can cut at an angle as in the video.
05:33 If the bolts are long, cut to size so that they do not protrude from the nuts
06:05 Almost everything is ready, it remains to clean the parts with acetone solvent and start ...
06:19 I advise you to first make a primer
06:28 Next, paint over the inside of the pipe and parts that have the same color.
06:39 Next, the rest of the details, but first - close the inside with tape
06:56 After drying, start assembling
07:10 not caring to subscribe, like and leave your comment, this will help promote my channel
07:20 Template and helpful info
07:55 Thanks for watching, check out other videos on my channel. Best wishes for you 😘😘😘
Home Decor Idea - DIY Night Lamp from PVC Pipe
#NightLamp #PVC #Pipe #ArdoDiy
Видео Home Decor Idea - DIY Night Lamp from PVC Pipe канала ARDO DIY CRAFTS
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Home Decor Idea - DIY Chandelier from PVC PipeTop 5 Unbelievable Idea Using PVC PipeAmazing Idea || Make Coffee Table Glass bottle And Cement - Wishes Safety,Much HealthCreative ideas from cement and Wood Pallet - Great Garden Decoration from Recycled | Diy AquariumHandyman Tips & Hacks That Work Extremely Well ▶3Easy Home Ideas That Will Upgrade Your Home ▶2DIY Woodworking // How To Make A Unique And Sturdy Chair From Old Wood And TiresCreative DIY Ideas That Will Take Your Home To The Next Level ▶11Home Decor Idea - Diy beautiful night lampDIY Wooden Christmas Tree - How to make a Christmas Tree!AMAZING! Top 2 Ideas from PVC Pipe 110 mm!Cement And PVC Pipe . How To Make Flower Pots And Coffee Table From PVC Pipe Simple And Beautiful .3 Easy PVC Pipe Project Ideas - EP.2 | ThaitrickGenius Woodworking Tips & Hacks That Work Extremely Well ▶3Amazing Idea . Make Coffee Table And Chairs From Glass Bottle , Old Tire And Cement .Very Easy .Recycling Project From Old Tires And Wooden Pallets // DIY A Very Strange Design Table From ScrapsDIY Room Decor Ideas with Jute | Chalk Paint Home Decor7 NEW PVC Fishing HacksDIY Floor Lamp from Pallet and PVC Pipe