AutoCAD Electrical 2026 Full Course | Incoming Power, MCCB, Meters & Phase Indication (Part 9)

In this video, we draw the complete incoming power schematic for an industrial control panel using AutoCAD Electrical 2026.

This lesson focuses on creating a clean and professional incoming power sheet for the RO Water Filtration Control Panel, including protection, measurement, and phase presence indication. The drawing follows IEC standards and real EPC documentation practices.

Project used in this course:
RO Water Filtration Control Panel

Instructor:
Salman Azhar
Electrical Engineer with more than 10 years of industrial experience in:
• Control system design
• 11kV substation design
• Solar PV system design, installation, commissioning & troubleshooting

What is covered in this video:
• Drawing 3-phase, 4-wire incoming power (L1, L2, L3, N)
• Adding and configuring the main 50A MCCB
• Proper phase labeling and power flow representation
• Adding a digital voltmeter for voltage monitoring
• Adding a digital ammeter with current transformers (CTs)
• Correct CT placement and secondary wiring principles
• Adding phase presence indication lamps
• Safe wiring of phase lamps after MCCB
• Automatic wire numbering and tagging in AutoCAD Electrical
• Best practices for incoming power schematics

This video completes the incoming power and supply indication section of the control panel.

▶ Next Video (Part 10):
Motor Power Circuits & DOL Starters in AutoCAD Electrical 2026.

Subscribe to ElectroCAD for structured, real-world industrial electrical design training.

Видео AutoCAD Electrical 2026 Full Course | Incoming Power, MCCB, Meters & Phase Indication (Part 9) канала ElectroCAD