Ideal Vogue Leaking Flue Seal A day in the life of a Gas Engineer
Leaking Ideal Vogue Flue Today I've come to a job in Bradford, so the job is to wire a Nest in for a customer, so this boilers two years old and I just want to show you the flue was actually leaking so I went and took the case off the boiler Ideal Vogue , the flue is actually leaking, so I'll just show you this now.
So I'm going to look in this as well, they've also not put grommets in, they've just got wires straight through, so I'm going to sort this out for the customer, I'm going to take these wires out and put these grommets in as they should be done. You can see that as well, you can see all the water damage there, rust damage, so you can see that the flue been leaking in.
So I just come up to do a nest for a customer in Bradord and I just took care of stuff, if we have a look at the flue seal here, I was afraid of this boiler, I don't know if you can see in there, but that put flue currently, if you'll look there, flues not even in, you stay there,
So if we have a look on the top of the boiler there, we can see that it's all been leaking in there and corroded you can see where it's been leaking down as well, so I'm going to take this off, let's just see if I can slide it out.
So you can just see that, it's been just pushed up and the person that's installed it hadn't checked it, it's been serviced as well since, so whoever came and serviced it also hasn't spotted it. So I'm going to try and pull that out now and see if I can just deal with it. So we've managed to take the seal out and straightened up and we're going to test it now with the flue gas analyzer just to make sure it's all locked here, but it seems a lot better now. So hopefully that will be satisfied for the customer.
So that's it, we managed to site it for the customer, so we've done the Nest, that we actually came to do and we've also done the flue seal and we've tested all with the flue gas analyzer, so it's all safe and the customer's happy. One happy customer. Thanks for watching.
Ideal vogue combi boiler
Видео Ideal Vogue Leaking Flue Seal A day in the life of a Gas Engineer канала Allen Hart
So I'm going to look in this as well, they've also not put grommets in, they've just got wires straight through, so I'm going to sort this out for the customer, I'm going to take these wires out and put these grommets in as they should be done. You can see that as well, you can see all the water damage there, rust damage, so you can see that the flue been leaking in.
So I just come up to do a nest for a customer in Bradord and I just took care of stuff, if we have a look at the flue seal here, I was afraid of this boiler, I don't know if you can see in there, but that put flue currently, if you'll look there, flues not even in, you stay there,
So if we have a look on the top of the boiler there, we can see that it's all been leaking in there and corroded you can see where it's been leaking down as well, so I'm going to take this off, let's just see if I can slide it out.
So you can just see that, it's been just pushed up and the person that's installed it hadn't checked it, it's been serviced as well since, so whoever came and serviced it also hasn't spotted it. So I'm going to try and pull that out now and see if I can just deal with it. So we've managed to take the seal out and straightened up and we're going to test it now with the flue gas analyzer just to make sure it's all locked here, but it seems a lot better now. So hopefully that will be satisfied for the customer.
So that's it, we managed to site it for the customer, so we've done the Nest, that we actually came to do and we've also done the flue seal and we've tested all with the flue gas analyzer, so it's all safe and the customer's happy. One happy customer. Thanks for watching.
Ideal vogue combi boiler
Видео Ideal Vogue Leaking Flue Seal A day in the life of a Gas Engineer канала Allen Hart
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Air Source Heat Pump Installation | Things to consider #ASHPRenewable journey, heat, hot, water cylinders Plumber / Plumbing #solar #ashp Taking out an old Ideal Concord WRS255 40 years old installation of a Vogue 32 Combi BoilerOld copper pipe badly soldered don’t stress press when joining copper pipes #plumber #plumbingViessmann Vitodens 100 Combi Boiler Strip Down WB1CA detailed look at diverter valves and hydroblock in a boiler - Gas Training Part 2Plumber - Plumbing Jobs - New Boiler - Unvented Cylinders - Leaking Pipes - Van TourAtag Charity Boiler InstallationHow To Commission The New Viessmann 100 Combi Boiler QuickStart GuideMedium Pressure Tightness Test - NGCFEGas Training - No Hot Water - Viva Training Academy - Roy FuglerGas Training - Gas Pressures - Working Pressure / Standing Perssure - Roy FuglerViessmann Vitodens 050 Boiler Installation 2022 Model. 050-w - HeatableGas Training | Gas Pipework Faults TikTokGas Training - How To Service Unvented Cylinders Q&A Roy FuglerPlumbers Tools | Monument Pipe Cutters #ShortsHow To Use A Pipe Freeze Kit - How To Freeze PipesGas Training - Fault Finding On A Combi Boiler - How Components WorkHow To Repressurise Or Fill A Viessmann 050 Combi Boiler 2022 ModelWhat’s Inside The Magic Heating Box - Sherburn PlumberPlumbers Videos - Dangerous Gas Fires - Leaking Boilers - UK Plumber