How To Mount and Balance A Tire -EricTheCarGuy
Visit me at: http://www.ericthecarguy.com/
I often get asked how to mount and balance a tire with tools at home and the truth is that's WAYYY too hard. It's much better and easier to use the equipment that was designed for it. In this video I show exactly that, how to use the proper equipment to mount and balance a tire. It's not terribly exciting but I do show some things that are necessary when performing this work on an aluminum wheel. You MUST clean the bead area before you mount a new tire onto an aluminum wheel or else it will forever leak at the bead. I say this because all too often I see a tire that leaks air that's just been installed where the rim was not cleaned. Enough of my soap box. Also this video only covers the 'basic' tire mount and balance. When it comes to low profile or large tires it's a bit more complicated. As far as tires go these are pretty easy and straightforward.
I'd like to thank my friend Scott Armstrong for his assistance and for letting us film in his garage. If you're in the Cincinnati area and looking for auto repair work I suggest you contact him as he's a heck of a mechanic.
Armstrong Automotive: 513-939-3903
email: scott@armstrongautomotivellc.com
Discussion about this video: http://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/42849-how-to-mount-and-balance-a-tire#44974
Stay dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Видео How To Mount and Balance A Tire -EricTheCarGuy канала EricTheCarGuy
I often get asked how to mount and balance a tire with tools at home and the truth is that's WAYYY too hard. It's much better and easier to use the equipment that was designed for it. In this video I show exactly that, how to use the proper equipment to mount and balance a tire. It's not terribly exciting but I do show some things that are necessary when performing this work on an aluminum wheel. You MUST clean the bead area before you mount a new tire onto an aluminum wheel or else it will forever leak at the bead. I say this because all too often I see a tire that leaks air that's just been installed where the rim was not cleaned. Enough of my soap box. Also this video only covers the 'basic' tire mount and balance. When it comes to low profile or large tires it's a bit more complicated. As far as tires go these are pretty easy and straightforward.
I'd like to thank my friend Scott Armstrong for his assistance and for letting us film in his garage. If you're in the Cincinnati area and looking for auto repair work I suggest you contact him as he's a heck of a mechanic.
Armstrong Automotive: 513-939-3903
email: scott@armstrongautomotivellc.com
Discussion about this video: http://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/42849-how-to-mount-and-balance-a-tire#44974
Stay dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Видео How To Mount and Balance A Tire -EricTheCarGuy канала EricTheCarGuy
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![How to mount and balance a car tire yourself](https://i.ytimg.com/vi/HpkgeulrRJI/default.jpg)
![SCC Automotive Training: Hunter TCX 575](https://i.ytimg.com/vi/f_iRA7c79Ak/default.jpg)
![New Tires and Wheels #FairmontProject](https://i.ytimg.com/vi/buD3hrUfxJk/default.jpg)
![2003 Nissan Sentra Gets New Tires -Fixing it Forward](https://i.ytimg.com/vi/WKcU6bnON00/default.jpg)
![Changing Tires Basics](https://i.ytimg.com/vi/HJxSczemNy0/default.jpg)
![Cheap tire changer Talyn plus 1 review.](https://i.ytimg.com/vi/ZdTNHLeAYaY/default.jpg)
![how to use the wheel balancer](https://i.ytimg.com/vi/oFn4vVKsTzg/default.jpg)
![How to install a tpsm yourself! But should you? Tire pressure sensor monitor (EP 32)](https://i.ytimg.com/vi/cpVTh158FjM/default.jpg)
![Harbor Freight Tire Changer Pittsburgh Automotive Balancer Mojolever Tire Tool](https://i.ytimg.com/vi/HpL6-3u6Ct0/default.jpg)
![Tire Machine: Tire Remove & Install](https://i.ytimg.com/vi/BsOUtR_lTeE/default.jpg)
![How to mount and balance your own tires ,the old school way .](https://i.ytimg.com/vi/-l5OAmVXsbM/default.jpg)
![Ranger R76RTF Tire Machine Review & Demo -EricTheCarGuy](https://i.ytimg.com/vi/prNdzp7Y22w/default.jpg)
![WHAT RED AND YELLOW DOT MEANS ON TIRES WHERE TO PUT RED DOT ON WHEEL](https://i.ytimg.com/vi/VRtOoxnR7C4/default.jpg)
![How To Plug A Tire and Check For Leaks - EricTheCarGuy](https://i.ytimg.com/vi/Xq3dDoYRlQg/default.jpg)
![How To Change & Balance Your Own Motorcycle Tires | MC GARAGE](https://i.ytimg.com/vi/dAKIuSjPXxA/default.jpg)
![Tire School with Paul - Wheel & Tire Breakdown with Hunter TCX57 Tire Machine at World Tour Off Road](https://i.ytimg.com/vi/gsiKbBcCULA/default.jpg)
![Tire Mounting and Balancing Tips - How To Use a Tire Machine](https://i.ytimg.com/vi/tmMZZEJMAmo/default.jpg)
![Ultimate Harbor Freight Tire Changer Modifications](https://i.ytimg.com/vi/lvKGkh9U1Yo/default.jpg)
![Changing tires with NO TIRE MACHINE! Do it yourself for free.](https://i.ytimg.com/vi/k1Feg5CbMp0/default.jpg)