Metalcasting at Home Part 36, Degassing plunger
To eliminate trapped air in the casting a degassing plunger is used to push the degasser to the bottom of the crucible. The bubbles produced drive off hydrogen gas which is absorbed by the metal during melting.
Видео Metalcasting at Home Part 36, Degassing plunger канала myfordboy
Видео Metalcasting at Home Part 36, Degassing plunger канала myfordboy
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Paint Can Furnace with Accessories, Lost Foam Casting, and More!Metal Casting at Home Part 66 One Part Pattern with Detail on Both Sides.Reducing porosity in your castingsCan you degass aluminuim with carbon dioxideDegassing aluminium with argon gasMetal Casting at Home Part 90, Waste Oil Burner Part 1Can you degas aluminuim with common salt Sodium ChlorideStep by Step Aluminum Casting with Sodium Silicate SandMaking a Foundry Furnace From An Old Water Heater, Part 1Metal Melting FurnaceMetal Casting at Home Part 88 Audi Quattro MAF PipeSand Castings that machine like billet - Olson AluminumMetal Casting at Home Part 45 Home Made Propane BurnerMetal Casting at Home Part 54 Oil Fired Furnace Build Part 6 (Re uploaded)Casting Aluminum in a 1000lbs Greensand Moldlost foam casting IMPROVED green sand technique : lfc #2 - by VOG (VegOilGuy)myfordboy fluxing and degassing methods.Metal Casting at Home Part 65. Casting and Machining a Tee Slot Table.EASY build Vacuum Casting machine system for Lost Wax / PLA Casting - DIY chamber & Pump : lwc #6