Will this air engine push me along?
Ad: Save big with 60% off iolo System Mechanic, the ultimate all-in-one PC cleanup utility! Use the code "jamesbruton" at: https://www.iolo.com/coupon/jamesbruton/products/system-mechanic/?&isc=sm_jamesbruton_us_v_001
I was watching a video from YouTuber @matthiaswandel about an air engine that he built a few years ago. In fact it was a rebuild of an earlier project which he didn’t film, so he made an updated version and made a video about it.
I thought this was really interesting and I wanted to understand how it worked better so I thought I’d build my own version. Matthias sells plans for lots of the things his makes, and he also has software for generating gears, so you should check that out as well as his channel if you don’t already subscribe.
I bought the plans for the air engine which come with lots of photos, plans to cut the parts out of wood, and also a 3D model which is for Sketchup. There wasn’t any indication of how much torque the engine would generate in Matthias’s video and I think I want to make a slightly higher power version, so I’m actually going to redraw all the parts in CAD from scratch.
Matthias's video: https://www.youtube.com/watch?v=XRmFAopH80o
His downloads: https://woodgears.ca/
You can support me on Patreon, join my Discord, or buy my Merchandise:
***************************
Discord: https://discord.com/invite/fc6MedG7eW
Patreon: https://www.patreon.com/xrobots
Merchandise: https://teespring.com/stores/james-bruton
***************************
Other socials:
***************************
Instagram: https://www.instagram.com/xrobotsuk
Twitter: https://twitter.com/xrobotsuk
Facebook: https://www.facebook.com/xrobotsuk/
***************************
Affiliate links - I will get some money of you use them to sign up or buy something:
***************************
10% off at https://www.3dfuel.com/ - use code XROBOTS at the cart screen.
Music for your YouTube videos: http://share.epidemicsound.com/xrobots
***************************
CAD and Code for my projects: https://github.com/XRobots
Huge thanks to my Patrons, without whom my standard of living would drastically decline. Like, inside out-Farm Foods bag decline. Plus a very special shoutout to Lulzbot, Inc who keep me in LulzBot 3D printers and support me via Patreon.
HARDWARE/SOFTWARE
Below you can also find a lot of the typical tools, equipment and supplies used in my projects:
Filament from: https://www.3dfuel.com/
Lulzbot 3D Printers: http://bit.ly/2Sj6nil
Bearings from: https://simplybearings.co.uk/
Lincoln Electric Welder: https://bit.ly/2Rqhqos
CNC Router: https://bit.ly/2QdsNjt
Ryobi Tools: http://bit.ly/2RhArcD
Axminster Micro Lathe: http://bit.ly/2Sj6eeN
3D Printer Filament: http://bit.ly/2PdcdUu
Soldering Iron: http://bit.ly/2DrNWDR
Vectric CNC Software: http://bit.ly/2zxpZqv
Видео Will this air engine push me along? канала James Bruton
I was watching a video from YouTuber @matthiaswandel about an air engine that he built a few years ago. In fact it was a rebuild of an earlier project which he didn’t film, so he made an updated version and made a video about it.
I thought this was really interesting and I wanted to understand how it worked better so I thought I’d build my own version. Matthias sells plans for lots of the things his makes, and he also has software for generating gears, so you should check that out as well as his channel if you don’t already subscribe.
I bought the plans for the air engine which come with lots of photos, plans to cut the parts out of wood, and also a 3D model which is for Sketchup. There wasn’t any indication of how much torque the engine would generate in Matthias’s video and I think I want to make a slightly higher power version, so I’m actually going to redraw all the parts in CAD from scratch.
Matthias's video: https://www.youtube.com/watch?v=XRmFAopH80o
His downloads: https://woodgears.ca/
You can support me on Patreon, join my Discord, or buy my Merchandise:
***************************
Discord: https://discord.com/invite/fc6MedG7eW
Patreon: https://www.patreon.com/xrobots
Merchandise: https://teespring.com/stores/james-bruton
***************************
Other socials:
***************************
Instagram: https://www.instagram.com/xrobotsuk
Twitter: https://twitter.com/xrobotsuk
Facebook: https://www.facebook.com/xrobotsuk/
***************************
Affiliate links - I will get some money of you use them to sign up or buy something:
***************************
10% off at https://www.3dfuel.com/ - use code XROBOTS at the cart screen.
Music for your YouTube videos: http://share.epidemicsound.com/xrobots
***************************
CAD and Code for my projects: https://github.com/XRobots
Huge thanks to my Patrons, without whom my standard of living would drastically decline. Like, inside out-Farm Foods bag decline. Plus a very special shoutout to Lulzbot, Inc who keep me in LulzBot 3D printers and support me via Patreon.
HARDWARE/SOFTWARE
Below you can also find a lot of the typical tools, equipment and supplies used in my projects:
Filament from: https://www.3dfuel.com/
Lulzbot 3D Printers: http://bit.ly/2Sj6nil
Bearings from: https://simplybearings.co.uk/
Lincoln Electric Welder: https://bit.ly/2Rqhqos
CNC Router: https://bit.ly/2QdsNjt
Ryobi Tools: http://bit.ly/2RhArcD
Axminster Micro Lathe: http://bit.ly/2Sj6eeN
3D Printer Filament: http://bit.ly/2PdcdUu
Soldering Iron: http://bit.ly/2DrNWDR
Vectric CNC Software: http://bit.ly/2zxpZqv
Видео Will this air engine push me along? канала James Bruton
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Building a Camera Motion Control RigCan my Robot Dog Draw a Map?Star Wars BB-8 Droid v3 #5 | Head Control Arm | James BrutonStar Wars BB-8 Droid v3 #9 | Driving with the Head On | James BrutonConstant-Torque Spring-Balanced ActuatoropenDog V3: How I made it WalkStar Wars GNK Power Droid #7 | It's Alive! | James BrutonStar Wars BB-8 Droid v3 #11 | Side Panels & Skins | James BrutonBalancing Rotaped RobotHow To Make Robots Move Smoothly | Arduino TutorialIron Man Exosuit #16 - Main Mechanical Build | James BrutonStar Wars BB-8 Droid v2 #8 | Ball LEDs & Opening Panels | James BrutonRobot Dog Electronics - 3D Printed & Open Source #2Star Wars Robot GONK Power Droid Robot PART 9, Walking Forwards & Backwards | James BrutonScrew-Bike Demo at Makers Central UK #weird #bikeWrap-Around Robot Arm - Really Useful Robot #4Simulating a Compliant Dampened Spring with Current ControlRobot X #3 | Body & Electronics | James BrutonCycloidal Drive V3 & Robot Dog Test LegStar Wars R6 Droid #9 | Electronics with Arduino | James BrutonStar Wars BB-8 Droid v3 #4 | Flywheel Testing | James Bruton